80 series 3 inch lift

Post by **scottmcguinness172** » Tue May 30, 2006 5:45 pm

hey all im looking at buying a 3 inch lift for my 80 do i have to take the sway bars off so it clears the front tail shaft cheers thanks

scott

Post by **sniper** » Tue May 30, 2006 6:51 pm

why not just extend them down?

Post by **scottmcguinness172** » Wed May 31, 2006 6:03 am

like just make some spacer blocks for the front or something ill have to look in to it cheers thanks

Post by **ats4x4dotcom** » Wed May 31, 2006 1:43 pm

we do a kit which gives you sway bar spacer blocks, bump stop spacers for rear, new top plate for shock mount, and longer front shock, so you have a 10" front travel shock, and a 12" rear shock travel, with 3-4" springs.

You need aprox 35mm spacer for long shocks on the front sway bar.

Post by **BLC** » Wed May 31, 2006 6:52 pm

i just recently did a 3 inch lift on my POS

sway bars dont fit back in.. i made spacers for the front out of 25mm square steel tube

the rear im still making cause im a slacker

Post by **ats4x4dotcom** » Wed May 31, 2006 7:17 pm

we extend the links on the rear, stop them hitting the shocks.

Outer Limits 4x4 Board

80 series 3 inch lift

80 series 3 inch lift

Who is online