Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body lift

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Body lift

Post by eddy 76 »

sorry to go over it again guys but I am doing a body lift on my nk lwb this weekend and for the blocks will be using aluminium bar. Have done a couple on hiluxes already and used 50mm dia bar but from what Ihave read in the tech section most paj owners seem to be using 65mm bar is this right. would also like to know what others have done where recovery hook comes through rear bar.

cheers eddy
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

My body lift was done with 65mm diameter blocks, and I wouldn't use less.

The rear bar was cut either side of the recovery point, and it's difficult to spot the gap.

I'd post a pic if they worked...

Scott
Top
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Post by eddy 76 »

thanks scott is yours engineered and does your insurance company know about it as i would like to get it all approved. I spoke to an engineer about it and he reckons there was no need to have it approved.

cheers eddy
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Mine was approved in Qld, but I haven't transferred registration yet.

Yes, I told my insurance company - no problems.

Scott
Top
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Post by eddy 76 »

Thanks scott, I spoke to insurance company today and no probs at all also got 65mm dia bar so just a matter of finding time to do it now probably next weekend.
Top
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Post by eddy 76 »

does anybody know of another good body lift page as one in tech thread no longer works for a gen2 paj

cheers eddy
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests