Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

were can i get a 1"body lift in melb....

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

were can i get a 1"body lift in melb....

Post by pietro_vs_zook »

g`day....

i have a 90 swb suzuki vit and i wanted a 1" body lift... i have a 2.5 inch suspention lift and wanted a 1"BL..... i live in south east of melb.. bentleigh... and i was woundering were can i get them from.....??????

thanks
Top
Posts: 33
Joined: Fri May 26, 2006 9:55 pm
Location: Victoria

Post by xl7fan »

G'day, try Joe at 4play offroad in Kilsyth. 9761 4694
Matt 2001 XL7. OME 2" lift, Cooper ATR's, TJM alloy bar, Piranha Dual battery setup, Command cruise control, Viper alarm, Uniden UHF.
Top
Posts: 33
Joined: Fri May 26, 2006 9:55 pm
Location: Victoria

Post by xl7fan »

G'day, try Joe at 4play offroad in Kilsyth. 9761 4694
Matt 2001 XL7. OME 2" lift, Cooper ATR's, TJM alloy bar, Piranha Dual battery setup, Command cruise control, Viper alarm, Uniden UHF.
Top
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

Post by pietro_vs_zook »

thanks buddy.... how much am i looking at say just for parts......?
say a rough ball park fig......
Top
Posts: 33
Joined: Fri May 26, 2006 9:55 pm
Location: Victoria

Post by xl7fan »

No idea about price but all Joe does is Zooks - best just to call him
Matt 2001 XL7. OME 2" lift, Cooper ATR's, TJM alloy bar, Piranha Dual battery setup, Command cruise control, Viper alarm, Uniden UHF.
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

give me dimensions on bolt length and size, spacer diameter ( the new blocks) and i'll make them for you out of any material you want
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

Post by pietro_vs_zook »

thanks buddy.... appreciate that!!!!
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

be carful who you pay to do your bodylift. I have seen a couple of pretty dodgy bodylifts made by 4play offroad. The last one I saw the stud was cut short and the alloy block had been tapped onto the shortened stud. the alloy thread was stripped and effectively nothing (silocone) was holding the body to the chassis. If the bodylift is not as secure as the original mounting system then you should go elsewhere.
[url]http://www.vic.suzuki4wd.com/forum[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests