Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux diff ratio - Axle code

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Hilux diff ratio - Axle code

Post by sudso »

Vehicle is 1990 d/c hilux 2.8d

Axle code is G285

No ratio stamped on flanges

Anyone know what ratio this code is?

cheers
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 234
Joined: Fri Jan 27, 2006 11:12 am
Location: NZ

Post by Turoa »

4.3 ratio, 4 pinion limited slip. http://www.brian894x4.com/Gearratiosanddiffs.html
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

I just read if I uderstand correctly mine has a 3.42 when it is a 3 td? Could this be right? No wonder it is screaming with a 4.55 in while i put bearings through the orginal. Trans code is A01B
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

I tried this site and It was incorrect for my car....

I emailed toyota direct and they sent me a spec sheet for my car
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

I tried this site and It was incorrect for my car....

I emailed toyota direct and they sent me a spec sheet for my car
Can you post em up or email em to me please?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

pm please mate
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

I tried this site and It was incorrect for my car....
same hear
ive got G285 code & ive got open diffs
as far as i'm aware G282, G283 & G285 which are all 4.3 can be either open or LSD
if one code was specifically for LSD then fourbys with slipperys would need two diff codes as they dont come out with LSDs in the front
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

:? Damn Toyota configurations! Sounds as bad as Isuzu's.

This one's got the original LSD sticker on the rear housing and it does work well in the mud.

According to that site this rear diff is a 4.300 LSD 4 pinion with 4 "fins" on each side of the carrier housing, which it has.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 233
Joined: Tue Oct 11, 2005 7:35 am
Location: Bankstown

Post by Dingo »

Last number on the axle code represents the Pinion and LSD

Pinion & LSD
2 = 2 pinion open diff
3 = 2 pinion LSD
4 = 4 pinion open diff
5 = 4 pinion LSD
Other verification of either 2 or 4 pinion diff is,
On a 2 pinion it will have 3 fins either side of the outer case.
On a 4 pinion it will have 4 fins either side of the outer case.

All Hilux's have 8" front and back unless it has IFS then the fronf diff will be 7.5" and the Ratio's will be the same.

You can check this out on the Surf Site

Diff Ratios

Also American released Hilux's have a different coding on the Compliance plate. So be carful when you do a search on the WWW
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 130 guests