i have got 3 inch lift with carrol springs and extended anti inversion shackles.
Any suggestions on a better alternative
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
better flex rear 60series
Moderators: toaddog, Elmo, DUDELUX
What is the rear spring pack designed for? Load carrying, height, comfort...?
As long as the shackle is angled back slightly towards the centre of the spring \ , the shackles are greased a 'normal' (non load carrying) spring will give reasonable articulation.
BUT, a sway bar and/or a light load will not allow the spring to 'work'.
An anti inversion shackle will only stop the shackle from locking back onto the chassis, not articulation.
As long as the shackle is angled back slightly towards the centre of the spring \ , the shackles are greased a 'normal' (non load carrying) spring will give reasonable articulation.
BUT, a sway bar and/or a light load will not allow the spring to 'work'.
An anti inversion shackle will only stop the shackle from locking back onto the chassis, not articulation.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
not sure if the 60 has the same drama as the 75 but the best way Ive seen to get flex from a 75 rear was to get custom springs made 200mm longer from the center bolt to the front eye of the spring, then cut you front mounts off the remount them 200mm towards the front of the chassis. then slap on a set of drop shackles and wala. mabe dumb dunce could put in a bit more info or pm me and ill let you know what else i had to do.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Re: better flex rear 60series
Go back to you old springswhiteghost60 wrote:i have got 3 inch lift with carrol springs and extended anti inversion shackles.
Any suggestions on a better alternative
New spring will take a fair while to flex
Supported By
Milanco
Phones N Alarms
Buds Customs
Milanco
Phones N Alarms
Buds Customs
Who is online
Users browsing this forum: No registered users and 121 guests