Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series off road ability Vs GQ

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

80 Series off road ability Vs GQ

Post by Suspension Stuff »

I know how good Patrols are in the bush and I know the 80 series is good also.

If similar mods are made to an 80 series and a GQ and they both have lockers (So no limited slip diffs) will the GQ be able to go further on the trails in comparison to the 80 series. Lets say they both have 3 inch lifts and same 33 inch tyres.

Just Curious :lol:
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Post by sniper »

This will cause a shit fight in the nissan section.

TOYOTA OF COARSE

only driven a 1 GQ and it went well, my 80 has soooo much torque i love it. I think this will mainly go down to the driver and how skilled he is.

The nissans have a bit stronger driveline though, but being locked would just about even the field in that department.
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

I would guess the GQ would have more chance of being able to turn the front wheels with the front locker engaged, with less chance of breaking the front diff.

Otherwise, this will be an interesting thread!
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

80 series would have more diff clearence but maybe a bit top heavy.
33 inch tyres should not be too big to wreck the driveline??
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Post by Emo »

It depends on how hard you intend to drive it. I've got an 80 series and I love it and it does everything that I ask of it (it is more capable than I am) but if I wanted to go harder core I would probably get a GQ. They are not as refined as an 80 series but are probably stronger in the drive train. Mine is my everyday transport so I wanted a bit of comfort and refinement.
Posts: 50
Joined: Sat Jul 16, 2005 5:11 pm
Location: Ballarat

Post by stoo2 »

Emo wrote: but if I wanted to go harder core I would probably get a GQ.
John, can I quote you elsewhere on that?

:)
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Post by stinger »

Do not get me wrong I think Cruisers RULE....

But it like the old saying it is not what you got but how you use it!!!

I think the biggest factor in a vehicle capability is the driver. Each vehicle has its own pecurarities (however you spell it) and the driver must be able to use these either to his advantage or not let it hold him/her up.

My suggestion to everone is that it is not how hard you drive it but how smart you drive it. Drive anything hard and it will break somewhere.... sometime.... and cost you $$$$$$$$$$$

My 2 cents worth....
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

I would prolly say the 80..

The front ends seems to work a bit better (suspension wise), more diff clearance and more power, the only down side would be the fact the 80 is a little more top heavy...
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

The early model 80 series sucks, they're more prone to breaking stuff no matter how you drive it
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

What in the early model 80 series is prone to breaking???
I am getting an auto turbo diesel 1990model (Besides bottom end bearings)
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Post by sniper »

well i just recently did big damage in my 1990 80 series :cry:



















ran up the arse of a ford focus at 5km/h and write it off(focus that is), and scratched my bullbar :bad-words:
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

Post by Joombi »

Maybe I'm lucky, I bought my 91 td gxl in 99 and have not broken a thing... (touch wood)
Posts: 17
Joined: Sun Jun 04, 2006 3:05 pm
Location: Brisbane

Post by Claws »

The early model 80 series sucks, they're more prone to breaking stuff no matter how you drive it
That's crap MC. I've had my 90 model 80 for 8 yrs and haven't broken a thing. I haven't been soft with it and have driven over terrain that 100 series and GU patrols have broken CV's, diffs and trailing arms on.

The early 80 is no more prone to breakage than any other 80. Driver skill is another story though.
80 series cruiser.
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

The 80 series built after 93 were much stronger than the earlier models, I've had nothing but trouble with mine, front diffs, gearboxes. Didn't even have to drive it hard.

One gearbox rebuild was driven on the road for 3 months then shit itself :roll: wasn't real impressed.

4wd stuff, i hope your 80 has low kms on it
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

Dreaming

Post by ROCKRASH »

Claws wrote:
The early model 80 series sucks, they're more prone to breaking stuff no matter how you drive it
That's crap MC. I've had my 90 model 80 for 8 yrs and haven't broken a thing. I haven't been soft with it and have driven over terrain that 100 series and GU patrols have broken CV's, diffs and trailing arms on.

The early 80 is no more prone to breakage than any other 80. Driver skill i
s another story though.

Driven over terrain in an 80 that has broken GU cv's. Have you ever seen a GU cv side by side to an 80's. Your'e dreaming
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I know the early model 80 series CV's are not as strong as the later model 80 series CV's. How weak are the early ones, should I be worried about them with high traction 33 inch tyres?
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

CV's

Post by ROCKRASH »

Just about any cv in any vehicle is bustable. If your'e running big suspension, big power, big tyres, lockers, possibly low gearing and you actually drive the thing reaching somewhere near its physical limits then I don't know of any Toyota cv that is going to outsurvive a GU cv
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

One gearbox rebuild was driven on the road for 3 months then shit itself wasn't real impressed.
I am getting an auto and I am told the autos are buch better then the manual.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

Guys, this shit fight could go on forever, at the end of the day, its driver capabilities. Yes, 80 series are probably more top heavy, but is that because the majority of 80s with a 4 inch lift is all suspension, and on a GQ it would be suspension and body? And yes, I have no doubt in my mind that a GQ has stronger driveline, but at the end of the day, I drive my 80 everywhere I want to go and some places I know I probably shouldnt. Mine has a 5 inch lift, locked etc, but I reckon more people will respond saying GQ as there is simply more out there as they are heaps cheaper buy and repair.
There are pros and cons of every make on the market.

Just my 2c...
" Some days you are the bug; some days you are the wind screen"
Posts: 17
Joined: Sun Jun 04, 2006 3:05 pm
Location: Brisbane

Post by Claws »

The 80 series built after 93 were much stronger than the earlier models, I've had nothing but trouble with mine, front diffs, gearboxes. Didn't even have to drive it hard.

One gearbox rebuild was driven on the road for 3 months then shit itself wasn't real impressed.

4wd stuff, i hope your 80 has low kms on it
Again, Crap. The diffs are the same right through the years and into the 100 series. Only difference is a ratio change in the 100's. The 3F and 3FE used the H150 gearbox. The 1HZ used the H150 gearbox from 1990 to 1998.
If your rebuilt g/box only lasted 3 mths than I would be blaming your re-builder, not the box itself.
Driven over terrain in an 80 that has broken GU cv's. Have you ever seen a GU cv side by side to an 80's. Your'e dreaming
Generalised statement....The 100's broke cv's and a diff. The GU snapped a trailing arm completely in half.
I know the early model 80 series CV's are not as strong as the later model 80 series CV's. How weak are the early ones, should I be worried about them with high traction 33 inch tyres?
Say's who????? I run 33" Baja Claws and am yet to bust a CV. I also don't have lockers though. On our last trip the 60 series Sahara and 100 series GXL both busted CV's on tracks I had no problems on.

The only things the later 80's have over the earlier ones is braking ability and a better petrol engine.
80 series cruiser.
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

They have different CV's

Agree with what Jeff80 said
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 204
Joined: Wed May 25, 2005 6:18 pm
Location: Karratha Western Australia

Post by shanegtr »

One thing that has got me hung up a few times is the lower rear trailing arm mount. The 80 series bracket for it is below the chassis where as the patrol is up along side it. Some with the front radius arms(patrol a bit better tucked up), but I've never had a drama with the front. Toughness aside thats the only thing I could pick between the 2
80 Series forum
www.offroad80s.com
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Claws wrote:...Again, Crap. The diffs are the same right through the years and into the 100 series. Only difference is a ratio change in the 100's...
Crap :D

Many more differences than ratio change between 80 and 100 series diffs.
John
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Post by Emo »

I haven't broken anything major, just trim mainly. I hate the fibreglass flares and moulded mudflaps though. I reckon that they'll come off permanently in the near future though.
Posts: 15
Joined: Thu May 25, 2006 6:56 pm
Location: A.C.T

Post by -BJ- »

4WD Stuff wrote:What in the early model 80 series is prone to breaking???
I am getting an auto turbo diesel 1990model (Besides bottom end bearings)
80 series are great, but the pre 93 models were underbraked and underpowered (petrol)

If they're in your price range, have a look at a later model TD cruiser. Much better. The autos are also very heavy and expensive to repair, why not a manual ?

But back to the original point, yep, definitley comes down to driver skill.
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

Post by Joombi »

jeff80,
your quote "welcome to Jooga country" I've only ever heard this used around Croydon in NQLD
Posts: 17
Joined: Sun Jun 04, 2006 3:05 pm
Location: Brisbane

Post by Claws »

Bush 65 wrote:
Crap

Many more differences than ratio change between 80 and 100 series diffs.
Please enlighten me of the many differences.....I am talking front diff not rear.

GXL 100 series Auto V8 and the turbo diesel models have the same diff ratio as 80 series.
Early FJ80 series CV's are also used in the FZJ105,FZJ79,FZJ80,HDJ80,HZJ105,HZJ78,HZJ79 SERIES.
Mid 94 on 80's used a CV with a longer spline. Theses will fit earlier models if you change the hub cap to the later series caps. Transfercase is the same in all equivelent 80 and 100 series cruisers. The H151 gearbox used in turbo diesel and 4.5 petrol 80's is also used in the turbo diesel and V8 petrol 100 series.

So far, all the busted 80 and 100 series cruiser CV's I have pulled out have had a cage failure and were mostly caused by powering on full lock, especially if front lockers are fitted and on at the time.

Driver skill (or lack of) has a lot to do with breakages in normal 4wd activities.
80 series cruiser.
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I am going to do the part time conversion when I get my 1990 model turbo diesel 80 series. Would this enable me to fit the later model cv's. Are there a different part time conversion kits depending on the cv it uses? I assume the later model cv's are stronger. :?

Ta
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

Jombi, Is that a good thing or a bad thing?? "Jooga" is actually my nickname.
" Some days you are the bug; some days you are the wind screen"
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

Post by Joombi »

Yeah Jeff its a good thing, if you're from Croydon (Jooga Country) you call every one "Jooga" or "joog", its the same as calling someone mate, down the road at Georgetown, its "Joe", Jooga means same thing as Joombi....
I bet someone from/worked up the Gulf way gave you that nic name...
wear it well.
Joom...
Post Reply

Who is online

Users browsing this forum: No registered users and 85 guests