Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stereo prob's

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 80
Joined: Tue Sep 27, 2005 9:52 pm
Location: perth

stereo prob's

Post by hill billy »

howdy folks,
heres the prob, i just got a new head unit,4 channel amp,sub,and 6x9's.
i cant get both the sub and 6x9's workin off the amp,

my deck has 4 rca points on the back of it, so i have 4 rca goin to the amp.

its starting to shit me because i have rewired it several times and is becoming a pain in the arse, might just have to settle and stick to running the 6x9's off the deck?
lifted middy no flex, 34's twin lockers bit of doof and a wanky outers sig
Top
Posts: 170
Joined: Fri Mar 03, 2006 10:55 pm
Location: ipswich

Post by Oscars »

if the rca is in the amp to deck, and the amp has + to b+ and trigger and a good earth, try another pair of rca's if that doesent work maybe a crook amp.
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Have you got each 6x9 speaker using 1 channel, and the sub running off the other 2 channels (bridged)??

Just make sure your filters and gains are set correctly, it may be working but you're not hearing it.

It HAS to work, you dont need to run your 6x9s off the head unit. :lol:
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 80
Joined: Tue Sep 27, 2005 9:52 pm
Location: perth

Post by hill billy »

tried with 2 amps same problem, i just pretty much just cant channes 3-4 workin, hot4 have tried playin with the gains etc but still nothin, and yes 6x9's each on own channel and sub bridged on chanel 1-2
Last edited by hill billy on Mon Jun 12, 2006 7:57 pm, edited 1 time in total.
lifted middy no flex, 34's twin lockers bit of doof and a wanky outers sig
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Oscars wrote:if the rca is in the amp to deck, and the amp has + to b+ and trigger and a good earth, try another pair of rca's if that doesent work maybe a crook amp.
What?
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

are the 4 RCA's on the back of your head unit all outputs.. or is one an input?

Has been done before ;) i know in my headunit (pioneer) u can turn the RCA outputs off, see if this is the case for yours.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 80
Joined: Tue Sep 27, 2005 9:52 pm
Location: perth

Post by hill billy »

will check tomorrow its a sony headunit and i have pre sub if any1 nows what that means
lifted middy no flex, 34's twin lockers bit of doof and a wanky outers sig
Top
Posts: 170
Joined: Fri Mar 03, 2006 10:55 pm
Location: ipswich

Post by Oscars »

What?


Its the basics the amp needs!
Top
Posts: 85
Joined: Tue Jan 03, 2006 2:19 pm
Location: Sydney

Post by tropey »

check to make sure the channels you are using for the sub can be bridged. some amps can only bridge channels 3 and 4 but will not work if you try and bridge channels 1 and 2. Just a thought.
Top
Posts: 80
Joined: Tue Sep 27, 2005 9:52 pm
Location: perth

Post by hill billy »

ok allsorted now i needed to get some splitter cables, thought they were both audio outs but turns out one is for a cd stacker :oops: but cranks up good now :cool:
lifted middy no flex, 34's twin lockers bit of doof and a wanky outers sig
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest