Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

making steering work with gq diffs and leaf springs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

making steering work with gq diffs and leaf springs

Post by ZOOK60 »

How would i go about putting gq diffs under my hilux i cant seam to work out how to do the steering. How do you get the drag link to miss the leaf pack at the knucke end?
P.E.T.A
People eating tasty animals.
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Re: making steering work with gq diffs and leaf springs

Post by STUMPY »

ZOOK60 wrote:How would i go about putting gq diffs under my hilux i cant seam to work out how to do the steering. How do you get the drag link to miss the leaf pack at the knucke end?
You would have to make a high steer arm.

I've seen where they pick up on the standard point and the king pin like to toyota arms.
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

pm hypolux ;)
DRIVE IT!!!!!
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

Thanks steve but i rang him last night told me about a hysteer setup that craft differentals do but 'TSL' pmed me and told me that he no longer makes them..Does any one know if poor hysteer made by wendle would worl with leaves?
http://www.outerlimits4x4.com/PHP_Modul ... php?t=5951
P.E.T.A
People eating tasty animals.
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Jake heres some pics from the Thread that Wendle posted in the Nissan Bible may help with seeing where the New posi of the tie rod will be ..........But from memory without reading back through that thread Carlton had the tapers for the TRE's cut back through from the other side to raise it even further .....so you will have to take into account that the tierod will be lower than pictured



Cheers Dan

Image
Image
Image
Image
[b][i] DAN [/i] [/b]


:silly:
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

more
Image

Image
Image

The pic below is the stock posi
Image
[b][i] DAN [/i] [/b]


:silly:
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

more
Image
Image
Image
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

hi jake

J Mac Diff & Gear in Sydney did make high steer arm for 80 series & gq patrols but don't know if they still do or not
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

think jake still want to run leaves.
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

tozook wrote:hi jake

J Mac Diff & Gear in Sydney did make high steer arm for 80 series & gq patrols but don't know if they still do or not
Yep thats where hypo got his done but "TSL" said they dont do them any more
P.E.T.A
People eating tasty animals.
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Maybe bubs off the board can design and fab sumthing up to suit your needs Jake


Or heres is John mcdonalds phone no. although this is and old pm I had saved so the no. may well be changed may be worth a call

The guy that does the histeer arms is john mcdonald his number is
0419 485348 not sure on the price. Cheers


heres a bad pic of Hypo's old rig

Image
Last edited by A1 on Mon Jun 12, 2006 2:23 pm, edited 1 time in total.
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

yeah cheers Dan, i spoke with Jake last nite and i have been looking thru my pix and cant find the close up ones of the arm.
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

i have the close up pics of hypos steering arm at work.

if you need to shot us a pm i should be able to help you out
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 352
Joined: Mon Dec 23, 2002 9:10 pm
Location: Sydney

Post by 65Mog »

Here is a close up of the J Mac Histeer arm, give John a ring 9671 5800 he might do one for you but I don't think so, your best bet would be to go and have a talk to him.

Image
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 99 guests