Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hz turbo oil supply

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 204
Joined: Wed May 25, 2005 6:18 pm
Location: Karratha Western Australia

Contact:
Contact shanegtr

1hz turbo oil supply

Post by shanegtr »

Is the oil supply for aftermarket turbo's taken from the oil pressure sender? Dosent seem to be a lot of room there as its right near the starter. If not wheres it taken from? What tread is the tapped hole?
80 Series forum
www.offroad80s.com
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Yep, its taken from there...a tee piece is required, i think the thread is metric, but close to 1/8 bspt
Andrew
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

dow50r wrote:Yep, its taken from there...a tee piece is required, i think the thread is metric, but close to 1/8 bspt
Andrew
I think it's an NPT thread but you can jam a brass BSP fitting in there. Enzed or Pirtek will sell you all the relevant bits.

there is plenty of room to get a T piece in there.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests