Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fj 45 what they like??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Fj 45 what they like??

Post by Tuflux308 »

Hi guys just bought a fj45 off a mate with a clevo 302 in it duel fuel.. Has rusted roof, question is can you get fibre galss roofs, panels etc.. thanks
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 306
Joined: Mon Dec 27, 2004 3:59 pm
Location: Sunny QLD

Post by MattGU »

Yes

www.ozeastfibreglass4wd.com.au/
Top
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

or these guys http://www.frp.com.au/ they are pretty good too.
I'm considering getting a roof off them for my 47
If at first you dont succeed.......get a bigger HAMMER!!!
Top
Posts: 35
Joined: Mon Feb 20, 2006 8:02 pm
Location: Western Sydney.

Post by FJOE45 »

You can get all the panels in fireglass.
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

Go the 45!!!!

I recently sold a fibreglass ute roof second hand in very good nic for $200 - i think new they are close to $400??? for a ute one.
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

cheers guys, thanks for the response...
Think i might do it up and make it my bush basher, sick of fixing the lux... thanks again
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

Another question guys...
Has drum brakes on front, have a full front end with discs from 60 series here , was wondering if the hubs will fit.. or is is not as straight foward as that?

SOA who has done it, looks very straight foward,, can do it no probs, just wanted to know how it goes with engineers, or if this needs to be engineered?
cheeers
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

Engineering depends on what state you live in
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

Tuflux308 wrote:Another question guys...
Has drum brakes on front, have a full front end with discs from 60 series here , was wondering if the hubs will fit.. or is is not as straight foward as that?

SOA who has done it, looks very straight foward,, can do it no probs, just wanted to know how it goes with engineers, or if this needs to be engineered?
cheeers
havent done it myself, but dont think its as straight forward as just bolting them up.

just put the 60 series axle housings under it :twisted: extra 3inches width.

MaccA
Top
Posts: 50
Joined: Wed May 18, 2005 10:44 pm
Location: melbourne

Post by playtime 4x4 »

Why not bolt in 4'' 60 rear springs front and rear. They are a heap longer spring so they will flex
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 103 guests