I replaced the centre on my rear diff, straight swap from wreckers. All went well, was same ratio as stuffed centre removed. What I wanted to know was the ratio
stamped on the crown gear was 38.8/1 is this my ratio? if so what numbers on the I.D plate tell the reader what ratio's the vehicle had from the factory?
I am curious because I want an lsd or mechanical locker, and I don't want to get the wrong one!
I am in a 82 MQ SD33 SWB
Any advice or help would be great!
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diff ratios
Who is online
Users browsing this forum: No registered users and 1 guest