Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

I have some problems with Diesel 4x4 Hilux Please Help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 38
Joined: Sat Sep 17, 2005 5:28 pm
Location: Bundaberg/Cairns

I have some problems with Diesel 4x4 Hilux Please Help

Post by FrankB »

My ute is a 1982 Hilux LN46R which contains the original L (2188 cc) motor. It has 270 000km on it and has had injectors changed 1 month ago and is regularly serviced every 5000kms (oil and filter).
The problem is the motor is chewing a lot of oil but no water or anything else. There are no engine leaks so not sure where it is going. It also has lost a lot of power and sometimes is hard to start. I am not sure but I think the glow plugs might need to be changed as they are original. Does anyone know how much it costs to change glow plugs? If you have any ideas about what may be wrong with it, please let me know. Any help will be appreciated.
Posts: 259
Joined: Fri Sep 10, 2004 11:32 am
Location: Brisbane

Post by Clown Boy »

New glow plugs should set you back $80 or so - and take an hour to swap over.

Cant speak if all your troubles likely to be due to glow plugs tho.

I was recently told how to test the existing glow plugs. When they die, they form an open circuit. So if you take off the glow plug rail and connect a test light to the positive terminal of your battery to the point of each glow plug - light means ok, no light means farked.
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you

He will look after your rig, trailer or fleet.
Posts: 13
Joined: Fri Jun 02, 2006 1:02 pm
Location: Tewantin

Post by jimkaybam »

mate,
Sounds to me the compression is down due to wear.... Rings shot thus hard to start.If it isnt leakin oil then it is burnin it.. Not good news,,
I wouldnt spend doe on glo plugs before checkin compressioin out.
I recon you could need an expensive rebuild!!!!
Jim
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

jimkaybam wrote:mate,
Sounds to me the compression is down due to wear.... Rings shot thus hard to start.If it isnt leakin oil then it is burnin it.. Not good news,,
I wouldnt spend doe on glo plugs before checkin compressioin out.
I recon you could need an expensive rebuild!!!!
I'd say jimkaybam is on the money here. Is it getting pretty smokey?
Tetanus rolling on 37's
Posts: 38
Joined: Sat Sep 17, 2005 5:28 pm
Location: Bundaberg/Cairns

Post by FrankB »

No it is not that smokey. It smokes huge amounts of white smoke when cold at start up and then only whit-grey smoke when it is underload otherwise it is fine. So not sure what it is?
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

FrankB wrote:No it is not that smokey. It smokes huge amounts of white smoke when cold at start up and then only whit-grey smoke when it is underload otherwise it is fine. So not sure what it is?
That's oil!

Diesels under load blow black smoke - not white-grey.

Run your finger around the inside of your exhaust pipe. What comes off?

Scott
Posts: 38
Joined: Sat Sep 17, 2005 5:28 pm
Location: Bundaberg/Cairns

Post by FrankB »

When I run my fingers inside the exhaust I get nothing but black stuff
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

Just do a compression test it will give you a good idea how good the engine is, do a wet test also.
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

when was the last valve adjustment done ?
Posts: 38
Joined: Sat Sep 17, 2005 5:28 pm
Location: Bundaberg/Cairns

Post by FrankB »

:?: What is a valve adjustment? A valve adjustment has never been done on this engine before.
:?: One other question what is a wet test this might sound stupid but please explain??
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Post by cooter »

a valve set is a tune up adjust rocker clearance

a wet test is the second stage of a compression check you first do it dry and if that cyl is low on pressure sqirt a little bit of oil in that cyl and if it stays the same then it is valces or head gasket if it rises it is rings
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Posts: 13
Joined: Fri Jun 02, 2006 1:02 pm
Location: Tewantin

Post by jimkaybam »

The more i hear the more i think the ol girl needs a new set of rings etc,Down on power, white smoke at startup,nice greasy exhaust.
Dont spend any money on it until an "Expert" has had a look.
Jim
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests