Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Motor Adaption
Moderators: toaddog, Elmo, DUDELUX
Motor Adaption
This goes to all people who are up on the toyota gearboxes and bellhousings
ok i am running 21R-C with Diesel 4 Speed Gearbox then Hilux Transfer
Gearbox to t-case is a no brainer but the motor to gearbox i am unsure as to what bellhousing, clutch and flywheel i will require
can i use the 18R bellhousing on my petrol gearbox on the diesel (asking cause i havn't picked up the diesel gearbox and haven't pulled petrol gearbox of 18R motor i have)
and for a clutch i can then use the 18R one right
so anyone able to fill me in on what i need to do?
ok i am running 21R-C with Diesel 4 Speed Gearbox then Hilux Transfer
Gearbox to t-case is a no brainer but the motor to gearbox i am unsure as to what bellhousing, clutch and flywheel i will require
can i use the 18R bellhousing on my petrol gearbox on the diesel (asking cause i havn't picked up the diesel gearbox and haven't pulled petrol gearbox of 18R motor i have)
and for a clutch i can then use the 18R one right
so anyone able to fill me in on what i need to do?
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
If it was a real good option i could make an adapter to fit the deisel box behind the Petrol engine but it would take a lot of time and effort and i dont realy think it is worth it. The box is old and i beleive it to be weaker than a G52. I have seen way too many deisel 4spd fail. Especialy when behind V8 engines.
I beleive the 5spd is a better option and at least then you will be able to run just about any engine in front of this as bellhousings are basicaly all interchangable.
I beleive the 5spd is a better option and at least then you will be able to run just about any engine in front of this as bellhousings are basicaly all interchangable.
i will use the petrol one for ease then for now till i decide on a which motor i want to eventually runn - who knows i have thought of rebuilding the 21R - i am going to put a new timing chain and guides on and need the gaskets to reassemble to motors so it might get rings as well.
so basicly i will decide what gearbox to run when i decide which motor i will run all the time
so basicly i will decide what gearbox to run when i decide which motor i will run all the time
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Who is online
Users browsing this forum: No registered users and 0 guests