Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
two inch pipe
two inch pipe
hi all i have 1985 lwb seirra and am thinking 2 inch or bigger exh pipe has any one got any ideas to what is the best for power and performance out of 1.3 spook ????????? thanks brett
dont go any bigger than 2" , have you got extractors? with extractors and 2" system you will get a slight but noticeable increase in proformance, but nothing huge, but you will get a big increase in noise is your engine stock? alot of exhaust shops don't recommend more than 1 3/4" others don't care . i run a 2" system with extractors , but to quieten it a bit around town i put a 1 3/4" reduced tip (my canopy's stuffed and the noise gives me a headache) on it
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
I have a 2" - 2.25" system on the 1.6 Viagra. Even a full 2" system is probably excessive without extractors - maybe 1 3/4" going into 2" would be better, and with variation in pipe size you get less droning.
The Vitara sounds good with it's new pipe, but it would be way to big for the sierra.
This topic has been discussed before - someone had some real experience on what was optimum for the Sierra - I believe it was 1 7/8"..
The Vitara sounds good with it's new pipe, but it would be way to big for the sierra.
This topic has been discussed before - someone had some real experience on what was optimum for the Sierra - I believe it was 1 7/8"..
Had two inch system on my SWB Zook a few years ago and it didn't seem to work real well. Same system on the 1.6 toyota mill I put in seemed to restricted. ( You can't win ) Inch and a quarter with extractors and high flow muffler would be a better option.
Just stuck a full 2 inch system on the EFI Vit and the improvement is remarkable. Better response down low, motor rev's cleaner and higher and with extractors, high flow Cat and muffler, resonator it sounds the job too
I 'spose the difference in the two is that the Vit is high flow throughout whereas the toyota motor had big muffler and poorly designed extractors.
Once I work the head and stuff in a cam and some other stuff the system will come into its own
Just stuck a full 2 inch system on the EFI Vit and the improvement is remarkable. Better response down low, motor rev's cleaner and higher and with extractors, high flow Cat and muffler, resonator it sounds the job too
I 'spose the difference in the two is that the Vit is high flow throughout whereas the toyota motor had big muffler and poorly designed extractors.
Once I work the head and stuff in a cam and some other stuff the system will come into its own
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
Who is online
Users browsing this forum: No registered users and 38 guests