Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sumps

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

sumps

Post by Frankenyota »

Would like to know if a v6 vn commodore sump is interchangeable with a v6 chev and if the chevy has the deep part of the sump at the back.

cheers
Matt
Top
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

hey mate i have a chev 229 in my hilux and yes the deep part of the sump is at the back.. However i doubt they are interchangeable because the chev v6 runs an open front sump for the cam and i doubt the commodore one is.can email u pics if u want
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Yeah pics would be great. Commodore front sump goes around the timing chain cover at bottom, so i assume its open?
Both v6's were made by Biuck, or commodore was a copy of one.
Where would you find a sump for a v6 chev?


Matt
Top
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

i will send em pics today sometime and i jsut might be able to organise a sump for u..even a short motor to ;)
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

Frankenyota wrote:Yeah pics would be great. Commodore front sump goes around the timing chain cover at bottom, so i assume its open?
Both v6's were made by Biuck, or commodore was a copy of one.
Where would you find a sump for a v6 chev?


Matt


A Chev V6 is not a Buick nor is a Buick V6 a Chev
The Chev 229/262 V6 is a cut down version of a 305/350 Chev V8 and made by Chevrolet
The Buick is a version of the Buick V8
Both companys are owned by the General Motors Corperation but they are there own entity
The Chev V6 sump is rear mounted
The Commodore sump is front mounted
The Buick sump is mid mounted
The Buick has 2 different bolt paterns on the sump 14 and 21 bolts

Adrian
www.chevtorque.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests