Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Range Rover flares

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

how much???
Last edited by mickrangie on Thu Jun 22, 2006 10:31 am, edited 1 time in total.
TD5 96 Discovery UTE.
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Post by mangie »

$500 kevlar

$350 fibreglass

There extra large like you know whos, but different :armsup:
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

Now you tell me, after I spent the day repairing my old ones. They have come up like new....but I don't think they will last that long.

As soon as I work out what I am doing with my "project" I will take some Kevlar ones for the front guards only. :lol: :lol:
Thanks,

Adam
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

how hard would it be to make 2 door rangie flares fit a 4 door?
TD5 96 Discovery UTE.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Ill be needing 2 sets of 4 door ones at some stage
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Good work Mangie, got any pics?
Do you need 4 door rears to take a mould off?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Will the kevlar ones be any stronger or more flexible than the f/glass ones ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

i'll take a set of fronts only when my bank starts looking healthier!

Simon
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Post by mangie »

Loanrangie wrote:Will the kevlar ones be any stronger or more flexible than the f/glass ones ?


They will be stronger, much stronger. Not unbreakable though
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Post by mangie »

6.5 rangie wrote:Good work Mangie, got any pics?
Do you need 4 door rears to take a mould off?

Pics. by mid week.
Will have 4 door rears done within 2 weeks. Does you know who only sell flares as a kit or can you buy say just 2 rears ?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

mangie wrote:
6.5 rangie wrote:Good work Mangie, got any pics?
Do you need 4 door rears to take a mould off?

Pics. by mid week.
Will have 4 door rears done within 2 weeks. Does you know who only sell flares as a kit or can you buy say just 2 rears ?
LRA sell them individually.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

mickrangie wrote:how hard would it be to make 2 door rangie flares fit a 4 door?
I have 2 door flares on the rear of my 4 door, they require more cutting as they are a bigger opening, the top of the flare mounts just below the body crease.
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 69
Joined: Fri Jul 22, 2005 8:34 pm
Location: BAYSWATER VIC

Contact:
Contact Fglass

flares

Post by Fglass »

Hi Mangie,
what resin is used for for your flares, and do you use any glass in the Kevlar flares ie tissue to stop print through from the Kevlar weave.
Your prices sound very fair.
Regards Jason. :cool:
JT Fibreglass Products.

Manufacturers of quality fibreglass products.

www.jtfibreglassproducts.com.au
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Re: flares

Post by mangie »

Fglass wrote:Hi Mangie,
what resin is used for for your flares, and do you use any glass in the Kevlar flares ie tissue to stop print through from the Kevlar weave.
Your prices sound very fair.
Regards Jason. :cool:
Hello Jason

Yes there will be a small amount of glass in the kevlar flares.

As for the resins, I'm not to keen on shouting that out.
Suffice to say these flares will be tough, real tough, but not unbreakable.

Thanks, I think the prices are very good. I have family in the game and get all my materials at a very good price.

Be aware that over time I will be adding more parts from the Land Rover family. (I noticed your web site seems to only cater for Toyotas so I won't be treading on your toes :D )

Regards

Chris
Top
Posts: 67
Joined: Fri Nov 29, 2002 11:22 am
Location: Hornsby NSW

Flares

Post by tjames »

Id be keen for a set of kevlar ones in a month or two when the bank account looks a bit healthier.

Thomas
76 2 door Rangie, 33" MTR's, GQ Diffs, 3.9 Disco EFI, ZF Auto.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Mangie, how about dashpods for rangie's, the ones that fit in place of the pissy little coin tray thing in the middle of the dash ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Post by mangie »

Sure, have you got one to copy or a particular design?
Top
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

BUMP

We got any pics available yet. Looking cutting the gaurds on my disco to make way for bigger wheel in the future and these sound like the go so far.

edit* are these sold in complete kit form like LRA or just the actual flares?
-Scott- wrote:Isn't it a bit early in the day to be pissed? :finger:
Top
Posts: 100
Joined: Mon Jun 23, 2003 9:05 pm
Location: Rosvale Qld (south of 'Switch)

Post by mu-stu »

BUMP :)
2003 4.7lt V8 Jeep Grand Cherokee Laredo
1981 3.5ltr 2dr Range Rover
------------------------------------------
Welcome to Australia - the nanny state!
Top
Posts: 876
Joined: Wed Apr 14, 2004 7:30 pm
Location: Terrigal, NSW

Post by fightara »

bump - are these still around?
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

any developments with these???
Nice gq swb ute chop with a huffer for the good times
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 19 guests