Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Who to repair winch motor?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

Who to repair winch motor?

Post by matsmad »

I recently bought a winch off a member from this forum under the impression it was working. As it turned out, It was full of water and rusty when i opened it up. Who would be the best people to repair/replace this motor? It is a 24v Thomas winch.
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

winch industries are at no. 2 Coin St Salsibury here in brisbane, they are the distributor for Thomas whinchs. I dont have a pnone number for them, but there in the white pages.
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

Could also try hargreaves at jindalee.. though doubt if it'd be attractive to em...

Other thought is the motor guy who rebuilds baldor and rockwell servo's at springwood, contact AP Controls for his number... or ask Area54 if he still checks in..

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

i took my winch motor to an auto elec they fixed it up all good sealed it all back works a treat only cost around $50 bucks
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

hargreaves will be too dear, if its been under water you will need the gearbox looked at anyway.
Top
Posts: 48
Joined: Wed Jan 14, 2004 11:00 pm
Location: Thomastown, Vic

Re: Who to repair winch motor?

Post by GQPatrol V8 »

matsmad wrote:I recently bought a winch off a member from this forum under the impression it was working. As it turned out, It was full of water and rusty when i opened it up. Who would be the best people to repair/replace this motor? It is a 24v Thomas winch.
Try here , they are the manurfacturers of Thomas winches, now called A.P.E. Winches

http://www.winch.com.au/winch/winches/electWinch.html


Cheers,
Shane
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

winch motor

Post by matsmad »

I dropped it in to a truck auto elec today (it is 24v) and hes gonna look at it 4 me. :?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

winch

Post by matsmad »

The auto elec quoted me $350 for a rebuild. Thats new armature, redo field windings and new brush pack. That sound ok? :?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests