Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

washing snatch strap

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Post by MUSS »

i just hit em with the GERNY LMAO
had no problems
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Posts: 172
Joined: Mon Mar 24, 2003 4:18 pm
Location: Redcliffe

Post by vompie69 »

I usually just throw all the straps in the wash tub, fill it up, swish it around getting off excess dirt. Repeat this a couple of times, throw it in the washing machine with washing powder (as you would with clothes) and hang on line when dry. Most of us do it that way, straps still going strong. :lol:
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

wouldn't using fabric softener
soften the stitching
giving my strap premature breakage


aaaahhhhh
thats the real reason
for the weak stitching
blame your wife
:silly:
Posts: 99
Joined: Thu Jul 10, 2003 10:49 pm

Post by MAV-RIK »

Carlovers does the job for me, if i go out and it gets filthy i just lay it out flat on the ground in the carwash bay hold the nozzle about 2in away from the strap on high pressure rinse spray 1 side flip it over spray the other give the ends a good spray double it over till its short enuff to wring out then take it home and throw it on the line till dry.MAV
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests