Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

Contact:
Contact Eric

100 series lift

Post by Eric »

I am about to lift a 100 series & am looking for advice with witch way to go , I need to acheive a 4 inch lift to fit 37 inch tyres . I was told best bet was big balls off road , others say some 4 inch springs long travel chacks , standard arb camber kit , adjust the bump stops and the jobs done . would love hear from anyone with insite to this delema of mine


thanks in advance.

Ps , are there diff gears available for the 100 series and if yes , who and how much ?? thanks guys & gals
Top
Posts: 249
Joined: Mon May 26, 2003 9:37 pm
Location: brisbane

Post by greenhilux »

is it Ifs or coil spring?
?
Top
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

Contact:
Contact Eric

Post by Eric »

greenhilux wrote:is it Ifs or coil spring?
?




its a riggid axle coil sprung
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

What you said sounds like the go.

Post up some before and after pics!

Nick
______________________
PRAISE THE LIFTED
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday eric
If you want to put 37's on there you will need a 6 inch lift at least.
They will go on, but articulation will see them hitting the body bits. (When i had 38's on, they just touched with a bodylift aswell as 6 inch Dobsons)
Andrew Wollongong fj80
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests