Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Welded front or shimmed up LSD

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Welded front or shimmed up LSD

Post by bad_religion_au »

opinions? i'm putting the front axle together on my fj40, and i've got the choice... welded front or shimmed up LSD.

will a shimmed up LSD in the front make it climb step-ups easier? (biggest weakness of the current design)
Spit my last breath
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

At least with a shimmed LSD you'll be able to turn corners. The locker will tend to plough a lot more.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

hey Ads, when i busted my old front diff and welded it at robe it was a dog to drive, would hate do drive it like that all the time. if it was a tight track i had to unlock one hub to turn properly. also i would not like to drive down a steppy hill and have the wheel ripped from my hands!!! Biz has a tight lsd in the front of his 75 and it steers good and seems to work a bit better than an open diff. but it's still not even close to a locker!! :lol:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests