Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series 5 link

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

could u engineer this in queensland?
and also could this be made so that the front bushes are pinned for on road use ?
I was thinking about this myself and I believe it would be pretty simple to add a bolt or pin setup to fix it for road driving.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

4WD Stuff wrote:
could u engineer this in queensland?
and also could this be made so that the front bushes are pinned for on road use ?
I was thinking about this myself and I believe it would be pretty simple to add a bolt or pin setup to fix it for road driving.
Glenn did design an air operated latch that could be operated with an air locker solinoid but the XLink worked so well it didnt warrent locking it off
and there were other more important things to research and test so it was left alone and i dout that glenn would be keen to test it eather!!!!

on my setup there is provisions for a bolt lock off very easy to do.
I guess that it would be easyer to pass for engineering if this was offroad use only(locked off). I had no issues!!(nsw)

Chad
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

is there any chance i could get some sorta detailed pics or plans to take to my engineer and ask

ive already got me cab chop n v8 pre approved by qld transport and about to try for the a frame rear so i guess now would be the time to try for a x link too
Top
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

yer wanna see some pics???????????please[/quote]
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests