Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

any difference between imported patrols and aussie made?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 33
Joined: Fri Nov 26, 2004 11:39 am
Location: port douglas

any difference between imported patrols and aussie made?

Post by dreaded monster »

can anyone tell me if theres any major or negative differences between imports and aussie made patrols
LIFT IT
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

i know that at least if not all import patrols have a 24V electrical system which isnt really a negative but can be a pain in the arse when spare parts are needed. Can be a positive when wanting to run a winch as a 24V winch will have lower current draw.
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

my MQ is 24v but i thought they all were
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

resale.
Top
Posts: 33
Joined: Fri Nov 26, 2004 11:39 am
Location: port douglas

Post by dreaded monster »

cheers guys
LIFT IT
Top
Posts: 33
Joined: Fri Nov 26, 2004 11:39 am
Location: port douglas

Post by dreaded monster »

cheers guys
LIFT IT
Top
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

Resale is a big one.........my mate only managed to sell his LWB safari yesterday for 3000 bucks. It was an 88 model but was absolutley immaculate. This isnt really a problem if you dont really plan on selling it or so on though.
24v is a slight pain in the arse, just get a 12v inverter for your 12 v items and its all good. There is a 12v feed in the centre of the dash for the stereo but that is the only one I have found. 24v compressors are available so that isnt a concern.
Most, if not all manual safaris come with a PTO winch which is great. Have used mine many a time for various recoveries with no hassles.
Suspension parts and the like are all the same as the aussies so that just bolts on.
Cant really think of anything else :?
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

I had nothing but dramas with my MQ's 24V system. Is the GQ setup any better?
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

MQ080 wrote:I had nothing but dramas with my MQ's 24V system. Is the GQ setup any better?
oh crap. are they really that bad or do you think you just had bad luck MQ080?
so far the stickers i started removing is my first head ache! some one has tryed before me and scaped alot of paint off then restickered it, so the back half were newish stickers and the front 20 year old POS stickers :bad-words:

ps. sorry for going way off topic.
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

They are the same vehicle mechanically. It is only spec level that is different. The differences are like the differences between a Maverick and a Patrol.
I wouldn't worry about the 24v side of things. You can use the 12v wiring diagram for most things, you just need to figure out the different wire colours. There is a factory 24v to 12v convertor as most of the dash is 12v. I have changed the cig lighter to 12v as well.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests