Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Patrol Front Shocks vs. RR Classic Front Shocks

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 167
Joined: Sun May 22, 2005 5:59 am

GQ Patrol Front Shocks vs. RR Classic Front Shocks

Post by harvey »

ok... before i get shot down in flames for asking a question on this... I have searched and trolled through heaps of threads to find the answer to this question. But to no avail.


Front shocks for a 3" lifted nissan - should the length be 325mm comp/550 ext? And is this the same as a +2" lifted RR Classic on the front?

I ask because i thought that for the front of a 3" lifted GQ Patrol I should ask for +2" lifted RR Classic front shocks [which I thought had the above quoted compressed and extended measurements] but the fella on the end of the phone said that the lengths I quoted were for a standard sized RR Classic front shock.

So am I asking for the right length shock? And is my understanding of the RR/GQ Patrol compatability of a 3" lifted Nissan shock correct or not??

Thanks
Harv.
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

The measurement you quote is correct.
The same goes for the Patrol, we use the same shocks for a 2 inch lift patrol as we use for a standard replacement.
So Rangie 2" lift shocks are also used as a standard replacement. These shocks are longer than what the shocks the Rangie and the Patrol come with from the factory.
This shock you asked for is the correct shocks.
If you want a bit longer shock on the front it may be worthwhile looking into a standard front Landcruiser shock. However it is a big jump up to 615mm extended

No flames, good question.
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

so the chap i spoke with was mistaken when he said my quoted length for front shock was for a standard RR classic shock rather than a +2" rr classic shock?
Top
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

I run 80 series LandCruiser shocks up front. They work well!!!!

Image
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

A correct valved Rangie Shock is too soft, I run 79 Series Cruiser in the front of my GQ.

If the shop deals with the right suspension company they will know this stuff or be able to ask.
Last edited by LOCKEE on Thu Jun 29, 2006 9:43 am, edited 1 time in total.
Top
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Contact:
Contact JOHNZ

Post by JOHNZ »

That's about right for 3" lift
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

so the chap i spoke with was mistaken when he said my quoted length for front shock was for a standard RR classic shock rather than a +2" rr classic shock?
We use this shock for standard Rangie/Disco, 2" lifted Rangie/Disco and 3" lifted Patrols.[/quote]
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

Excellent Shane. Thank you for clarifying this.
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

just a little bit of a hijack but are RR coils the same as gq front ( OD size )
so for example if i had coil spacers of a rangie would they fit front gq coils ;)
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

I dont think so. I think the outside diameter for rr coils is 118mm vs. 140mm for patrols
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

Just to confirm, what Harvey said. Will not fit.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I have twin 80 series LC shocks in the front with a 3" lift. The handling is amazing.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

harvey wrote:I dont think so. I think the outside diameter for rr coils is 118mm vs. 140mm for patrols
:bad-words: :x :cry: bugger and they were freebies also
oh well :cry:

thanx to 4WD stuff for the confirm also ;)
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

you could always try to sell them on ebay?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 14 guests