Would centres from a RN or LN46 with 4.88 gears fit straight into LN106 FnR housings with no modifications at all, with everything fitting and working ok?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lux centre swaps
Moderators: toaddog, Elmo, DUDELUX
lux centre swaps
thanks.
but whats the difference in the pinion flange?
but whats the difference in the pinion flange?
Lux centre swaps
Would i be able to jus swap the 4.88 RnP from the RN/LN46 centres to my LN106 centres?
Re: Lux centre swaps
You cant swap the RN/LN 46 4.875 R&P into a LN106 4.3 carrierjustinshere wrote:Would i be able to jus swap the 4.88 RnP from the RN/LN46 centres to my LN106 centres?
You can fit the complete 4.875 center into a axle housing but you will
need to either change the pinion flange because they have different bolt paterns also 8mm bolts on the RN/LN 46 or redrill the flange to 10 mm for the LN106
Adrian
www.chevtorque.com.au
Adrian
www.chevtorque.com.au
www.chevtorque.com.au
Who is online
Users browsing this forum: No registered users and 0 guests