Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Front Diff Shaking
GQ Front Diff Shaking
I Recently snapped my rear left trailing arm and have run into a few problems. I have got a 5" lift and 2" body with castor plates. The diff was wandering enough for a 35" claw to rip out my guard. After replacing the trailing arm I began to get a big shudder/shaking coming from the front end. This resulted in me crawling home at 20km/h.
I took it to South Coast 4WD and they checked it all over and come up finding the swivel bearings were out of alignment, and need to be replaced in the near future, and that I get a return to centre stabilizer.
It seemed to get rid of the problem except for when i drove over a certain rough style of road the shaking would come again just a fraction, but has been getting worse. It seems to happen at around 50-70km/h and makes me have to pull over and stop or slow right down.
Does this sound like it could be the swivel bearings? ?
I took it to South Coast 4WD and they checked it all over and come up finding the swivel bearings were out of alignment, and need to be replaced in the near future, and that I get a return to centre stabilizer.
It seemed to get rid of the problem except for when i drove over a certain rough style of road the shaking would come again just a fraction, but has been getting worse. It seems to happen at around 50-70km/h and makes me have to pull over and stop or slow right down.
Does this sound like it could be the swivel bearings? ?
mine used to do it with the shocks set on soft but was ok when set to 3 [rancho's] so maybe your shocks are stuffed.
I now have drop brackets and no more wobbles...ever.
shane
I now have drop brackets and no more wobbles...ever.
shane
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
event pics http://bigred.redbubble.com/
Check the bushes in the leading arms. If the crush tubes break away from the rubber, "head shake" is common. Neoprene is not the answer - use genuine. It seems that usually it is the rear bush that fails first. Not hard to check by dropping each arm in turn, although it takes a bit of time. We ALWAYS replace the rubbers on the chassis mounts as well. I find it difficult to understand how aftermarket manufacturers keep selling off set neoprene bushes for castor correction when these bushes appear to be the source of so much of "the traditional Nissan 80/90kph vibrations".
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
"they" informed you to fit a steering stabiliser !!!!!
has this been done ?????
good chance , if you havent done it , DO IT !!!!!!
also the other posts are a good checking point !!!
( not just swivel bearings , check wheel bearings as well !!!)
has this been done ?????
good chance , if you havent done it , DO IT !!!!!!
also the other posts are a good checking point !!!
( not just swivel bearings , check wheel bearings as well !!!)
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
and one day i'll just become a worthless housewife.
Hmmmm, my LWB, on the way coming back from holliday start to do exactely the same ...thing...good idea to check the bushes..
Thanks, Gabriel
Thanks, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Posts: 115
Joined: Thu Aug 21, 2003 3:42 pm
Joined: Thu Aug 21, 2003 3:42 pm
Location: Moved ages ago, ifyou know me you'll know where
Contact:
I had a similar problem with mine. it started when i put on 37" claws.
I saw several "experts" but without any luck. Finally one bloke checked it out for me and discovered that the castor plates that had been installed actually gave it 7 degrees of positive castor, instead of the 1 or 2 they should have.
Get that checked out on yours too if you dont have any luck.
Narellan Truck align found this on mine.
Good luck
I saw several "experts" but without any luck. Finally one bloke checked it out for me and discovered that the castor plates that had been installed actually gave it 7 degrees of positive castor, instead of the 1 or 2 they should have.
Get that checked out on yours too if you dont have any luck.
Narellan Truck align found this on mine.
Good luck
Steven wrote:I had a similar problem with mine. it started when i put on 37" claws.
I saw several "experts" but without any luck. Finally one bloke checked it out for me and discovered that the castor plates that had been installed actually gave it 7 degrees of positive castor, instead of the 1 or 2 they should have.
Get that checked out on yours too if you dont have any luck.
Narellan Truck align found this on mine.
Good luck
yeah, castor between 1-3deg + is a good start
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
Who is online
Users browsing this forum: No registered users and 0 guests