And what springs are you using.
What Bar and batteries, winch.
I have dual Bats, winch, arb bar, and have pedder springs which are 198psi. Clearance is 90mm unloaded 1/2 tank fuel.
What has every one else got
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bump Stops......
Moderator: Micka
Bump Stops......
What is clearance from bump stop to axle, measured at the smallest gap?
And what springs are you using.
What Bar and batteries, winch.
I have dual Bats, winch, arb bar, and have pedder springs which are 198psi. Clearance is 90mm unloaded 1/2 tank fuel.
What has every one else got
And what springs are you using.
What Bar and batteries, winch.
I have dual Bats, winch, arb bar, and have pedder springs which are 198psi. Clearance is 90mm unloaded 1/2 tank fuel.
What has every one else got
Town Vehicle - 02 TD5 SE Disco
Hi,
Have a look at the sticky FAQ for Rovers. Very comprehensive info on springs and bumpstop clearance. Stock is about 2-2.5".
I have dual batteries, bullbar, 350 Chev in the front with some sort of Peddars springs and bumpstop clearance of about 4".
At the back Hayman -Reece towbar (heavy), aftermarket (heavy) bumper, 80l lpg tank and bumpstop clearance of about 5". I know the rear springs are Rangie Spares 17" 220lb units and I'm still using a (working) load leveller. Even with these springs the load leveller makes a difference.
cheers, DL
Have a look at the sticky FAQ for Rovers. Very comprehensive info on springs and bumpstop clearance. Stock is about 2-2.5".
I have dual batteries, bullbar, 350 Chev in the front with some sort of Peddars springs and bumpstop clearance of about 4".
At the back Hayman -Reece towbar (heavy), aftermarket (heavy) bumper, 80l lpg tank and bumpstop clearance of about 5". I know the rear springs are Rangie Spares 17" 220lb units and I'm still using a (working) load leveller. Even with these springs the load leveller makes a difference.
cheers, DL
Who is online
Users browsing this forum: No registered users and 32 guests