How can I tell what a size/resistance a cooked friken tiny surface mount resistor used to be .. ( HP bluetooth GPS unit ... the bluetooth still works)
There are several others identical in size and appearance next to it .. could I take resistance measurements from that an replace it with a unit the same size .. what have I got to loose ??? it farked as is..
I know why the unit is fried ... an 14 year old with small phillips head screwdriver a 9v battery and some leads ... and a sore backside after his dad kicked it ...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Replace a surface mount resistor
Moderator: -Scott-
Replace a surface mount resistor
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
there sized by colour coding of the rings around the body of the resistor. NFI what the code is, i learnt that years ago and never used it again.
-Scott- would know it though. Otherwise i reckon you could probably get it from the dick smith electronics site.
im no electronics guru either, but i dont think resistors fail that often??
-Scott- would know it though. Otherwise i reckon you could probably get it from the dick smith electronics site.
im no electronics guru either, but i dont think resistors fail that often??
.. does the gps side still work ? or just the bluetooth side?
Re: Replace a surface mount resistor
The resistors could be any resistance, and given that it is fried and you don't have the cct diagram for it, it would be very difficult what value to get for sure. Let alone soldering the suckers in......love_mud wrote:How can I tell what a size/resistance a cooked friken tiny surface mount resistor used to be .. ( HP bluetooth GPS unit ... the bluetooth still works)
There are several others identical in size and appearance next to it .. could I take resistance measurements from that an replace it with a unit the same size .. what have I got to loose ??? it farked as is..
I know why the unit is fried ... an 14 year old with small phillips head screwdriver a 9v battery and some leads ... and a sore backside after his dad kicked it ...
If it is worth repairing, take it back to the distributors and see if they will have a look at it. Otherwise ditch it, as the extra 9 volts in the cct at the wrong points is likely to have take out a bit more than just the resistor.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
I don't think the SMD resistors are done that way as there isn't enough "acreage" on them to be visible.mickyd555 wrote:there sized by colour coding of the rings around the body of the resistor. NFI what the code is, i learnt that years ago and never used it again.
-Scott- would know it though. Otherwise i reckon you could probably get it from the dick smith electronics site.
im no electronics guru either, but i dont think resistors fail that often??
Usually they will have a three igit/letter code eg 10K, 4K7, 1M2. If you can see that on the body of the resistor with a magnifying glass if needed, you might be able to get it replaced.
Could you return the GPS/Bluetooth as a warranty repair? (If it doesn't look too tampered with)
Last edited by DamTriton on Mon Jul 03, 2006 10:08 pm, edited 1 time in total.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
all surface mount reisistors ive worked with just have very fine writing on themDAMKIA wrote:I don't think the SMD resistors are done that way as there isn't enough "acreage" on them to be visible.mickyd555 wrote:there sized by colour coding of the rings around the body of the resistor. NFI what the code is, i learnt that years ago and never used it again.
-Scott- would know it though. Otherwise i reckon you could probably get it from the dick smith electronics site.
im no electronics guru either, but i dont think resistors fail that often??
5k6 etc.
I am not having any fun with fine delicate equipment .. my digi cam (the one that can do macro anyway) has decided it is doing its best to make all my pics look like watercolors ... arghhhh ...
I believe we have a unit like this at work ,, I will see if it needs to come to the IT dept for a some reason
.. see what resistor it is .. and hopefully get a replacement ...
I believe we have a unit like this at work ,, I will see if it needs to come to the IT dept for a some reason
.. see what resistor it is .. and hopefully get a replacement ..." If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Damn shame if the one at work happened to blow up. Perhaps you could lend them your working onelove_mud wrote:I am not having any fun with fine delicate equipment .. my digi cam (the one that can do macro anyway) has decided it is doing its best to make all my pics look like watercolors ... arghhhh ...
I believe we have a unit like this at work ,, I will see if it needs to come to the IT dept for a some reason
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Hi love_mud, surface mount resistors use alphanumeric code called the EIA Code, to indicate their resistance value.
If you have an Altronics or Dick Smiths catalogue, you will find the EIA code listed in the data section of either catalogue.
It is also common practice in constructing surface mount electronic devices, to design the circuit to use as many of the same values as the circuit will allow, this helps to speed up construction and reduce costs. So you may be lucky and the surrounding resistor just might be the same.
Cheers and best of luck.
If you have an Altronics or Dick Smiths catalogue, you will find the EIA code listed in the data section of either catalogue.
It is also common practice in constructing surface mount electronic devices, to design the circuit to use as many of the same values as the circuit will allow, this helps to speed up construction and reduce costs. So you may be lucky and the surrounding resistor just might be the same.
Cheers and best of luck.
2007 TDV8 Range Rover Lux
2009 2.7 Discovery 4
2009 2.7 Discovery 4
if its the same as the little belkin module i have one here, if you can get a pcb shot i can match it up and ill be able to get a new resistor for ya and fit it too if your nearby, been doing SMD stuff for a few years, pm me if i can help.
cam
ps im sure there will be 100 smd resistor javadecoders on the net if you google, but be carefull smd caps, resistors and rf chokes all look very similar it may have not even been a resistor.
cheers
cam
cam
ps im sure there will be 100 smd resistor javadecoders on the net if you google, but be carefull smd caps, resistors and rf chokes all look very similar it may have not even been a resistor.
cheers
cam
[quote="75 cruser"]we want more donkey[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest