Another Freeking SPOA Q!

Post by **Aerenandmel** » Tue Jul 04, 2006 12:02 am

Ive got 1L diffs, Im going to spoa & put 1.3 NT diffs in, will the Brake callipers from the 1L disc brakes fit on the 1.3L discs. There is probably already a thread on this somewere, but I cant see it.

Post by **joeblow** » Tue Jul 04, 2006 12:05 am

the scariest thing you could do would be to use narrow track diffs.

Post by **Aerenandmel** » Tue Jul 04, 2006 12:14 am

cheep !!!!. I can get nt spoa set up from friend including after market steering for not much coin. Was engineered on donor vehicle.

Post by **christover1** » Tue Jul 04, 2006 12:18 am

Aerenandmel wrote:Ive got 1L diffs, Im going to spoa & put 1.3 NT diffs in, will the Brake callipers from the 1L disc brakes fit on the 1.3L discs. There is probably already a thread on this somewere, but I cant see it.

They look the same to me, though I haven't tried it.
The discs size is same, as I have my mates 1.3 discs on the rear and there was my 1.0s before that.

christover

Post by **christover1** » Tue Jul 04, 2006 12:26 am

joeblow wrote:the scariest thing you could do would be to use narrow track diffs.

Joes right there, it will be very scarey, but WT diffs aren't a great deal wider tha NT's, 3 0r 4" methinks, so you will need some rim offset, wheel spacers, or some method to widen the track.

christover

Post by **Aerenandmel** » Tue Jul 04, 2006 12:32 am

I got some flipped rims in the deal.

Post by **christover1** » Tue Jul 04, 2006 12:40 am

Aerenandmel wrote:I got some flipped rims in the deal.

Very cool deal, I got flipped 8" f100 rims, with offset change of about 65mm

The bearings cope ok, tho I imagine its a greater pressure on them

christover

Post by **Aerenandmel** » Tue Jul 04, 2006 12:47 am

My engineer dont want too know about the rims, but my brother had them on his sierra and a cop pulled him over for a breath test and asked were he could get some. kool

Post by **christover1** » Tue Jul 04, 2006 12:51 am

Aerenandmel wrote:My engineer dont want too know about the rims, but my brother had them on his sierra and a cop pulled him over for a breath test and asked were he could get some. kool

Post by **Podge** » Tue Jul 04, 2006 8:38 am

Aerenandmel wrote:Ive got 1L diffs, Im going to spoa & put 1.3 NT diffs in, will the Brake callipers from the 1L disc brakes fit on the 1.3L discs. There is probably already a thread on this somewere, but I cant see it.

The 1.0l disc brake set-up will bolt onto the 1.3l set-up. You can basically bolt this set-up onto everything down to LJ's.

Post by **Swamp Donkey** » Wed Jul 05, 2006 11:16 am

how much did Adobe charge you for those pimp ass rims aerenandmel? :drinking:

Post by **Aerenandmel** » Sat Jul 15, 2006 7:27 pm

SPOA done

Outer Limits 4x4 Board

Another Freeking SPOA Q!

Another Freeking SPOA Q!

Re: Another Freeking SPOA Q!

Re: Another Freeking SPOA Q!

Who is online