Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

does a 2.8 turbo manifold fit 2.4 hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Tue Dec 27, 2005 5:25 pm
Location: east kurrajong, NSW

does a 2.8 turbo manifold fit 2.4 hilux

Post by GRIFFO LN65 »

need to find out if a turbo manifold off a 2.8 hilux will bolt straight up to my 2.4 hilux or is there some modifications need to be done?? any help will be much appreciated thanks
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

bolt holes are slightly different and so are the port holes.

I had a turbo manifold off a 2.4 and it wouldn`t fit my 2.8
Top
Posts: 4
Joined: Tue Dec 27, 2005 5:25 pm
Location: east kurrajong, NSW

Post by GRIFFO LN65 »

do you think you could drill out the holes a bit more or are they a fair bit different?
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

not on the one I had, the port holes were even different
Top
Posts: 4
Joined: Tue Dec 27, 2005 5:25 pm
Location: east kurrajong, NSW

Post by GRIFFO LN65 »

ok thanks mate, i might just get it and give it a go
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

i think it depends on which motors your talking about here.

2.8 3L never came out with turbo's so its either an aftermarket manifold or more commonly a 2LT manifold which of course will fit back on a 2LT.
however i think generation 1 2L (2.4 atmo) head is a bit different so it may not fit. so you need to check which ver of the 2L your running.

i assume you already have a 2LT injector pump ??
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I`m talking all after market stuff
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

I have fitted an aftermarket turbo kit from a 2.4 on my 2.8.
The ports all lined up spot on but all the bolt holes were 1/2 a hole out.
I had them ovaled out with a milling machine for $50 and it fits perfect now.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests