Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3 inch body lift
Moderator: -Scott-
3 inch body lift
how u goin fellas i have made my self up some 3 inch body lift blocks and are about to stick them in just wondering with the extra lift will it tear out my brake lines or anything like that
1989 nf pajero 33" muddies, uhf, nite stalker driving lights more mods to come
It'll really bugger up your transfer case and gearbox levers.
Getting the TC lever to work was annoying enough with 2" (it either hit the back of the consol and wouldn't go into 2WD, or hit the front and wouldnt go into 4LLC). Probably need to cut quite a chunk out of the body to get it all going.
Probably have to get rid of or make a custom piece of rubber to go around them (or put up with the noise and water coming in).
Can't remember how much play is left in brakes and waaaaay too cold to go check now.
Also nothing major, but the earth cable from the engine will need extending. Mine JUST fits with 2" (at the back of engine bay on the passenger side, IIRC).
I think there'd be enough in the steering slip joint, but might want to check.
Any reason for the 3" over the normal 2"? If the lift is to stop wiping out the sills on rock n logs n junk, 2" is enough to get the sills above the chassis rails, so should mostly fix that. If not, get sliders. I guess the other reason to do it is tyres. I got no comments about that as I don't want to go bigger than 32's (maybe 33's one day), which fit fine with 2" lift.
Anywho, ur call. Good luck and have fun.
*edit* CR^P... Just read that ur's is 1989. All of what I said is re: 1993 NH. No idea what-so-ever what's relevant.
Getting the TC lever to work was annoying enough with 2" (it either hit the back of the consol and wouldn't go into 2WD, or hit the front and wouldnt go into 4LLC). Probably need to cut quite a chunk out of the body to get it all going.
Probably have to get rid of or make a custom piece of rubber to go around them (or put up with the noise and water coming in).
Can't remember how much play is left in brakes and waaaaay too cold to go check now.
Also nothing major, but the earth cable from the engine will need extending. Mine JUST fits with 2" (at the back of engine bay on the passenger side, IIRC).
I think there'd be enough in the steering slip joint, but might want to check.
Any reason for the 3" over the normal 2"? If the lift is to stop wiping out the sills on rock n logs n junk, 2" is enough to get the sills above the chassis rails, so should mostly fix that. If not, get sliders. I guess the other reason to do it is tyres. I got no comments about that as I don't want to go bigger than 32's (maybe 33's one day), which fit fine with 2" lift.
Anywho, ur call. Good luck and have fun.
*edit* CR^P... Just read that ur's is 1989. All of what I said is re: 1993 NH. No idea what-so-ever what's relevant.
Who is online
Users browsing this forum: No registered users and 0 guests