Looking at getting these from Sky Manufacturing
http://www.sky-manufacturing.com/
Just wondering if anyone has used them?
Are they legal?
Are there any foreseen problems with them? (more axle wrap maybe)
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Solid Axle Hilux Axle Relocation Plates ?
Moderators: toaddog, Elmo, DUDELUX
Solid Axle Hilux Axle Relocation Plates ?
Kind Regards,
Brad
Brad
If you intend to use these on the front of a SA lux, you can achieve the same fwd movement by redrilling the spring perch on one side as there is already a hole in one of them about 30mm rearward to stock location (= diff fwd 30mm) the only advantage i could see on the front is castor correction if using ext shackles or similar but these spring wedges seem flat and offer no correction.
Your call...
Your call...
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
angles
I was thinking maybe use the existing second hole that is forward a bit and replicate it on the other side on the front perch; then mount these in them to increase track. Do the same on the rear to increase track quite substantially and give better approach/depart angles 
Just don't know if it will affect anything else moving them this far
Just don't know if it will affect anything else moving them this far
Kind Regards,
Brad
Brad
Who is online
Users browsing this forum: No registered users and 3 guests