80 Series Key Cutting

[BLC]

Hi all

Just wondering where I can get a new key cut for my 1992 80 series. I tried toyota at kedron (im in brisbane/ northside) and they said they sell the blanks but dont cut the keys.. :S

so yeah, if anyone can point me in the direction of someone who can do this, and a rough price that would be awesome

p.s. there is no electric component to my key, its just metal and a plastic end

thanks in advance

Nik

[ferrit]

ANY locksmith can do it for you- if you have the blank, ANY hardware shop who cuts keys should be able to do it

[spazbot]

um try a lock smiths, i know bunnings and mister mints etc wont have the gear to cut them

[RV80]

All i did was get the blank from toyota and went to locksmith and he cut the key from the other one i already had..

[basketcase]

Try Northside Lcoksmiths if you are in kedron, they are in boothby st just off Gympie Road. Or go inbound a bit more to J Larsen or H A Reed.

Any good locksmith should have the key in stock. If it is a mill key some smaller shop key cutters may not have a milling machine to do it. Best bet is a locksmith.

[bj42turbo]

Try Northside Lcoksmiths if you are in kedron, they are in boothby st just off Gympie Road. Or go inbound a bit more to J Larsen or H A Reed.

Any good locksmith should have the key in stock. If it is a mill key some smaller shop key cutters may not have a milling machine to do it. Best bet is a locksmith.

Been a locksmith myself for 20 odd years i would recomend all keys should be cut at a reputable locksmith, keep away from most key cutters. And if the key is worn ask them to decode it and cut it to code if you cant supply the key code.

BJ

[mudmacaca]

Been a locksmith myself for 20 odd years i would recomend all keys should be cut at a reputable locksmith, keep away from most key cutters. And if the key is worn ask them to decode it and cut it to code if you cant supply the key code.

Listen to this lad. You should just get it coded and any good locksmith will to this.

[mud4b]

Try Northside Lcoksmiths if you are in kedron, they are in boothby st just off Gympie Road. Or go inbound a bit more to J Larsen or H A Reed.

Any good locksmith should have the key in stock. If it is a mill key some smaller shop key cutters may not have a milling machine to do it. Best bet is a locksmith.

Been a locksmith myself for 20 odd years i would recomend all keys should be cut at a reputable locksmith, keep away from most key cutters. And if the key is worn ask them to decode it and cut it to code if you cant supply the key code.

BJ

interrested in this decode thing.
my only key is fairly stuffed and was going to get one cut.
how do they decode em? mine seems to be missing any numbers.