Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 63
Joined: Wed Mar 15, 2006 6:36 pm
Location: Brisbane-- Jimboomba

body lift

Post by lewy »

how do u lift the bull and rear bars on a 80 series when doing a 2"body lift would appreciate any pics if anyone has any thanks lewy :?
03 STL GU 4.2Tdi
Because reliability counts!! [size=150][/size]
Top
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

hey mate most ppl i no useually just slot the mounting holes where the bolts go through and slide the hole bar up..

or if there is enough room just redrill all the holes if there is enough plate to do so.... if it doesent copromize the bull bars streghth especialy if its a winchbar
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests