Working VERY roughly, we can look at the numbers of "centre blocks" and "side blocks" in each print.
40psi: 4 centres, 3 sides
30psi: 4.5 centres, maybe 3.5 sides?
20psi: 6 centres, maybe 5 sides.
13psi: 7.5 centres, about 7 sides.
So, from 40 psi to 13 psi, whichever way you look at it, contact patch roughly doubles - where the pressure has reduced by a factor of 3.
It's definitely not a directly linear relationship, which is what I would have expected.
Cheers,
Scott
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wide Vs Skinny Mud Tyres
Moderators: toaddog, TWISTY, V8Patrol, Moderators
A very interesting point this one, one that could change a lot of "opinions" here.4WD Stuff wrote:Dragsters use wider tyres for the large contact area to the ground.
the dragster tyres underwent a massive change in the 70's, the wider larger tyres here were designed to de-form but not in the traditional sense of "wider" for more traction.
have you observed the change when "dragsters" warm their tyres, all noise and smoke yes by the tyres themselves change. They change from shorter, wider tyres to taller, thinner tyres.
Now the gain-sayers amongst us will argue that the warm-up is different from the main drag run, and you may be right. On the main timed run (drag) the taller thinner tyre performs one crucial task. It performs the work of a slingshot, the elasticity in the now longer (re: taller, thinner) tyre assists to propel the car forward faster during acceleration.
Think of the tyre as bagging in the forward direction rather than bagging in the sidewards direction. This single development is what allowed dragsters to move forward with faster times and higher top speeds.
This may or may not be relevant to the argument but I hope this gets more people thinking about the issue of 'fat vs thin'
this is a good argument, i have enjoyed reading it and I hope it continues
bundy_harry
Who is online
Users browsing this forum: No registered users and 151 guests