Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hj75 winch cradle

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 46
Joined: Wed Jun 15, 2005 10:53 pm
Location: Perth

hj75 winch cradle

Post by bigred »

Has anyone ever seen a :off the shelf" winch cradle to suit a hj75 with a ally bar
Punk Hater
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

probably talk to arb or tjm

or even better find out what bar it is and try that manufactorer but the other 2 do do them
Top
Posts: 50
Joined: Wed May 18, 2005 10:44 pm
Location: melbourne

Cradle

Post by playtime 4x4 »

TJM or ARB did not make a cradle for the factory alloy bar. Toyota fits the winch without one(not a good option). Take your measurments of the winch and see how much room you DONT have. Have done a few now and they are tight. If its too much hassle for you look for a second hand steel or ECB alloy. ECB is heaps stronger, will still need a cradle, which they supply.
Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest