To lazy and no time or room to do it springs to mind.
My 80 t/diesel needs a clutch box and transfer case rebuild..
anyone suggest someone who.
a/ knows exactly what they are doing
b/ can fix it the first time
c/ can do b/ with out making some fuking excuse
d/ doesnt cost the earth
e/ can do as i require..
The clutch is near shagged, grabbing etc etc
Flywheel needs machining
New rear main seal...because we are there anyways...
The box need bearings and all syncros replaced
The third member needs repacking/rebuilding or a part time conversion installed to remove the play in the center diff..
Basically make it like new again and no noises and play. I could do it myself, but after doing the math its easier to get someone who knows what they are doing to do it..
Anyone in the brisbane area of things...Please..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suggested G/box rebuilders in brisbane crusier specialist
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Suggested G/box rebuilders in brisbane crusier specialist
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !
2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Who is online
Users browsing this forum: No registered users and 0 guests