Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine almost totally disassembled right now - man, just put all the valves back in after lapping, that is a b*m of a job!
Anyway, my oik dipstick is loose - I reackon that is part of my oil leak problem - a light pull and out it comes (that is the whole sheaf part) - it 'wobbles' loose all day long...
Anyone sealed theirs in with gasket goo or anything?? idea's? if I can seal that life will be better
its a bit hard for me to describe, but it connects to the block about halfway down with a 12mm or 14mm bolt, its got a thin piece of steel coming off it down there and connects up just under the exhaust manifold...
yea make sure the little o'ring on the bottom of the pipe is still there like Kickingback99 said. i put a bit of ultra grey silastic around the o'ring before i slid it into the block.
