Gday just wondering if the following cracking near my engine mount is a "common" problem in GQ's.
I removed the steering box to fit a GU one and found it.
A Panhard bracket brace was fitted, but it looks like the panhard bracket has been repaired at some stage too.
Only the inside of the chassis is cracked.
I imagine that it might be possible to remove the engine mount and weld in a plate over the crack, then weld the engine mount back in place.
biggest question though would be if is it going to be strong enough?
Anyone know the going price of a bare chassis from the wreckers?
Also, since my gq is an 88 model, does anyone know if Nissan beefed up this area in later models
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cracked chassis
ouch!
This is also an occurence on 80 series cruisers, but I don't know how common. There was a post a few months ago in the general tech detailing methods to repair and what appeared to be some fairly good input. Not sure about the legality or engineering required for a repair though....
I love search... this was it...
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=69872
This is also an occurence on 80 series cruisers, but I don't know how common. There was a post a few months ago in the general tech detailing methods to repair and what appeared to be some fairly good input. Not sure about the legality or engineering required for a repair though....
I love search... this was it...
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=69872
Who is online
Users browsing this forum: No registered users and 134 guests