can anyone tel me the measurment from the original bolt hole and the new 1 in the caster plates u can buy?
any help would be good?
want to make them myself.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series caster plates
Moderators: toaddog, Elmo, DUDELUX
80 series caster plates
1993 80 Series
1985 Hilux Extra cab
If u ain't got Dirt in ya Beer YA in the Wrong Place!
1985 Hilux Extra cab
If u ain't got Dirt in ya Beer YA in the Wrong Place!
Re: 80 series caster plates
Castor plates $175Walrus 4X4 wrote:can anyone tel me the measurment from the original bolt hole and the new 1 in the caster plates u can buy?
any help would be good?
want to make them myself.
cheers
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Got any more details fo changing holes or what model Tarago?? I need about 2 or 3 degree but I would rather retain the original bush. (more flex and last longer). I am looking for alternatives atm.ats4x4dotcom wrote:what degrees you after?
if you use a tarago camber bolt, and chnage the front holes, you can run adj castor, for around the same effort.
Alec
GO the 80...The mods have started :-)
Who is online
Users browsing this forum: No registered users and 2 guests