Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Difflock Failure survey RESULTS

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 347
Joined: Sat Mar 08, 2003 4:22 pm
Location: Canberra, ACT

Difflock Failure survey RESULTS

Post by Gordo »

Please keep in mind the disparity of results reported (eg 1 locker reported with 1 failure = 100% failure ratio).

The primary focus of this survey was to highlight the most common problem with differing designs of locking diffs. A locker failure is equated to a failure of the locking mechanism due to it's own system's malfunction (eg Detroit runs out of oil or ARB air line breaks).

Please excuse the bodgey format. If you would like it in sexy Excel please PM/email me.

Thanks to all who particpated :)

Locker failures Survey
Target audience : Ausjeep and Outerlimits bboard users
Date Compiled : July 2003

Format : Reported/failures/Reason : Remedy

Type ARB

1/2/loose bolts damaged diffgears,air comp : fuse replace gears and locker bolts, replace fuse
1/1/electrical-switch : rewire switch
1/1/electrical-air comp : rewire air comp
1/1/electrical-fuse : replace fuse
1/1/sheared bolts : drill & retap to 3/8"
1/1/damaged carrier due to pinion breakage :replace carrier + pinion
1/0/3 years use
1/1/Internal airline failure : Replace airline
1/0
1/3/o-ring, air comp fuse + leaks :replace o-ring,replace fuse,
replace air line, 18 mths
2/0/air comp :solenoid oil contamination, dislodged rubber seal air pumped into line, replace seal
1/1/air comp failure : replace air comp
1/0/11 year old install, owned 6 months
1/0/air comp:leaking pressure sensor
2/0/air comp: fuse holder, air tank seal replace fuse holder, replace seal
1/0
1/1/severed air line against body: replace and reroute air line
1/1/melted air line: replace and reroute air line
2/1/intermittant wiring: rewire with water resistant fittings
1/0
2/3/Solenoid, air comp fuse, intermittant elec failures: replace solenoid,fuse rewire compressor
2/2/Air comp fuse: replace fuse
1/1/Cracked housing + oil contamination: Clean and Weld housing.
2/2 air comp:fuse, wiring. Air leak: replace fuse, rewire.replace air line

TOTAL 30 23
% Failed 77%

TYPE : OX
1/0/1 year use

TOTAL 1 0
& Failed 0%

TYPE Detroit
2/0/12 months
2/0/6 months
1/0
1/1/grenaded: replace
1/0/2 months
1/0
2/1(1) would not unlock from new : replaced under warranty, 7 years
2/2 broken pins: replace pins
2/0
1/1/broken pins and springs: replace parts
1/0/18 months
1/0

TOTAL 17 5
% Failed 29%

TYPE Lockrite
1/1/crosshaft snapped, broken shear pins: replace locker 3 years/150k use
4/4/shear pins snapped: replace shear pins
1/0/4 years use
1/1/shear pins snapped: replace shear pins 5 months
1/0

TOTAL 8 6
% Failed 75%

TYPE TrueTrac
1/ 0
1/0/4 months

TOTAL 2 0
% Failed 0%

TYPE CIG
1/0
1/0
1/0
1/0

TOTAL 4 0
% Failed 0%

TYPE Lokka
1/1/bent & fractured pins: replace pins

TOTAL 1 1
% Failed 100%
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

Nice work Gordo
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Go the good old CIG!!!!!!!!!!!!! :lol:

You forgot to mention its also the cheapest! :D :D

Nice work!

All ARB needs to do is fit a stronger Air line and mechanically there pretty good!
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

POS wrote:Go the good old CIG!!!!!!!!!!!!! :lol:

You forgot to mention its also the cheapest! :D :D


can work out dmore expensive if u keep blowing rear pinions :D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

hypolux wrote:
POS wrote:Go the good old CIG!!!!!!!!!!!!! :lol:

You forgot to mention its also the cheapest! :D :D


can work out dmore expensive if u keep blowing rear pinions :D


Thats only because your using weak arsed 5.29's that were desinged for a 2WD ute! Ya wank! :finger: :finger:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

POS wrote:
hypolux wrote:
POS wrote:Go the good old CIG!!!!!!!!!!!!! :lol:

You forgot to mention its also the cheapest! :D :D


can work out dmore expensive if u keep blowing rear pinions :D


Thats only because your using weak arsed 5.29's that were desinged for a 2WD ute! Ya wank! :finger: :finger:


i know but i gotta turn the big meat on the street some how 'ya wank' :finger:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests