Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Step Ideas for the GU

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 41
Joined: Fri Mar 31, 2006 2:41 pm

Rear Step Ideas for the GU

Post by Richo GU »

G'Day All. Have set of side by side draws and a waeco 50ltr fridge. Looking at different rear step options that could mount of the tow bar or rear bar that could help the misus who's all of 5ft get easier access to the fridge. Any ideas or directions pointers.

Cheers
Richo
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

just get one of those cheap plastic kitchen steps which you can just throw backin the car when not in use. At least it is portable so she can use them elsewhere too.
Ransom note = demand + collage
Top
Posts: 41
Joined: Fri Mar 31, 2006 2:41 pm

Post by Richo GU »

grimbo wrote:just get one of those cheap plastic kitchen steps which you can just throw backin the car when not in use. At least it is portable so she can use them elsewhere too.
Yea, good call reckon thats probably the only way to go. Engineering anything else would be costly anyway. Storage of something bulky like that is probably the only real issue
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

we have a red step that connects into the towbar hitch reciever on our work rodeos. i think they are from hayman reese, or xl body builders.
Top
Posts: 899
Joined: Mon Mar 28, 2005 7:52 pm
Location: BrisVegas

Post by gu4800 »

I've seen someone who made a fridge slide with built in tilt function, so when extended, the fridge tilts down for easy access. I think they used a hinge of some type and then cable to stop the fridge from tilting too far. Looked pretty good.
____________________
Dan

[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

gu4800 wrote:I've seen someone who made a fridge slide with built in tilt function, so when extended, the fridge tilts down for easy access. I think they used a hinge of some type and then cable to stop the fridge from tilting too far. Looked pretty good.
yep, I did the same. The 1st pic shows the slide in the tilted position and the 2nd one shows how the spring loaded tilt mechanism locks into place at the rear.
Regards Andrew.

Image

Image
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

Image
1988 351W GQ wagon
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

nice idea chops

but then ud need a step to climb up to reach the fold out step
wich would also need a step that also just so happens to need a step and so on n so forth
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I can slide the fridge out, and my ex could stand on the top of the tow bar or the rear bumper.

A GU doesn't work the same?

Scott
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

awill4x4 wrote:
gu4800 wrote:I've seen someone who made a fridge slide with built in tilt function, so when extended, the fridge tilts down for easy access. I think they used a hinge of some type and then cable to stop the fridge from tilting too far. Looked pretty good.
yep, I did the same. The 1st pic shows the slide in the tilted position and the 2nd one shows how the spring loaded tilt mechanism locks into place at the rear.
Regards Andrew.

Image

Image
How much to make another one Andrew? :D
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

could you reverse engineer one of the springloaded step thingys that the discos had ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 535
Joined: Sat Feb 05, 2005 9:57 am
Location: Oakleigh, Victoria

Post by of4x4 »

I was searching for something completely different and stubled across this. It might be what you're looking for (or be able to engineer something similar ;) )

http://motorcare.com.au/safet.htm
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

yep the safe-t-step is what we use on over 300 vehicles at work.
Top
Posts: 47
Joined: Sat Dec 04, 2004 10:45 am
Location: Hervey Bay Qld

Post by gone fishin »

a tilting fridge slide is ok, but when you have things tightly packed and you want to get something out of the bottom, everything collapses into the hole you make when you pull something out, it all falls over easily.
IV GU Wagon
MQ SWB Racer
Top
Posts: 41
Joined: Fri Mar 31, 2006 2:41 pm

Post by Richo GU »

of4x4 wrote:I was searching for something completely different and stubled across this. It might be what you're looking for (or be able to engineer something similar ;) )

http://motorcare.com.au/safet.htm

:armsup: what a ripper, nice and simple. Will get that step and also chops's little ladder thingy and we are away. Have a 2inch lift which means we need the little ladder thingy as well. Like the tilted slide as well but would not work with my setup
All is good :armsup: :armsup: :armsup:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

MKPatrolGuy wrote:How much to make another one Andrew? :D
Im pickin him up in morning to go to ateco, harass him there .. He can mod mine too
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 24 guests