Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

suzy diff sizes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

suzy diff sizes

Post by Mungrel Breed »

can any one tell me if suzuki diffs are physically the same size? that is they will all fit in the same housing :?: cheers
Always out numbered never out gunned!!!
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Re: suzy diff sizes

Post by christover1 »

Mungrel Breed wrote:can any one tell me if suzuki diffs are physically the same size? that is they will all fit in the same housing :?: cheers
Sierras?
Vitaras?
All Suzukis?

more info needed.
Better question for Suzuki section, may be some info in zook bibles at top of suzuki section

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Well a Suzuki Carry diff may not fit into a Sierra if thats what you mean :lol:
Or do you mean between all model Sierras, or between say Vitaras and Sierras?
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Re: suzy diff sizes

Post by "CANADA" »

Mungrel Breed wrote:can any one tell me if suzuki diffs are physically the same size


Make a fist...Thats how big they are :lol:
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

will a lj50/80 fit a seirra housing
Always out numbered never out gunned!!!
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

Mungrel Breed wrote:will a lj50/80 fit a seirra housing

As far as I know LJ 3Rd's do fit in 1L diffs...I could be wrong tho
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

looking for a cheep gear reduction for a mate with a 92 sierra
Always out numbered never out gunned!!!
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

Vitara 5.12:1 diff center...But by the time you find 2 plus fitting costs you might be able to find a transfer case with gears in it already
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

Mungrel Breed wrote:looking for a cheep gear reduction for a mate with a 92 sierra
How much of a reduction do you need?? It is as simple as putting N/T 1.3 (11/84-87) centres into a W/T. That will take your ratio from 3.7:1 to 3.9:1 is that all you need or do you need a lower ratio than that?

A good thing about using N/T centre in the front of 92 Sierra is strength, the N/T front hemi is 4x pin as opposed to most W/T's being 2x pin hemis.
http://stores.shop.ebay.com.au/4wd-products
Top
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

[How much of a reduction do you need?? It is as simple as putting N/T 1.3 (11/84-87) centres into a W/T. That will take your ratio from 3.7:1 to 3.9:1 is that all you need or do you need a lower ratio than that?] yeh that much i know, i know were there's an old 2 stroke, just wondering if they would fit
Always out numbered never out gunned!!!
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

You can only fit LJ diffs into 1.0 litre Sierras.
I have LJ50 2 stroke diffs in mine, they are 4:9's.
They will not fit any 1.3 diffs.

As stated Vitara front diffs (4:6 and 5:12 mostly) will fit with minimal trouble. Small amount of modification needed I believe.??

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

thanx for the info fellas :)
Always out numbered never out gunned!!!
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

From my knowledge (not tested)

You have to use the front vitara centre at both ends, or just the Vitara ring and pinion.


The vitara centre is weaker than the normal sierra one, and you'd want to use the sierra one for lockers anyway.


Do it, and put a minispool in both ends while you're at it :D




However, cheaper reduction would be easier to get from a 1 litre transfer case, and even the cost of a rockhopper isnt gonna be much worse than buying two front vitara 4.6 diffs (hard to get for this reason).


As for 5.12, it'd better be offroad only, or toy need to run something like 37" tyres for stock gearing :D


Even 4.6 for a road car well, you'll be driving on the highway at 90, or you need 33"s.
Top
Posts: 1151
Joined: Sat Jul 23, 2005 1:48 pm
Location: Does lost count?

Post by midnight »

Is there a difference in ratios between the N/T 1.3L and the N/T 1L?

I have changed my back diff over, and Im not sure if the ratios will be the same.

TIA
Chris
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

midnight wrote:Is there a difference in ratios between the N/T 1.3L and the N/T 1L?

I have changed my back diff over, and Im not sure if the ratios will be the same.

TIA
Chris
NT 1.0 litre diffs are 4:1

NT 1.3 litre diffs are 3:9
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

I have even heard that early rear wheel drive 323s centre will fit a serria. but then you will need custom axles. I do not know this for certain, just somthing somone told me once
Its a wheelbase thing
Top
Posts: 1151
Joined: Sat Jul 23, 2005 1:48 pm
Location: Does lost count?

Post by midnight »

christover1 wrote:
midnight wrote:Is there a difference in ratios between the N/T 1.3L and the N/T 1L?

I have changed my back diff over, and Im not sure if the ratios will be the same.

TIA
Chris
NT 1.0 litre diffs are 4:1

NT 1.3 litre diffs are 3:9
[Johnny Depp]
Oh Bugger
[/Johnny Depp]

Ok then, is it possible to put the disc brake setup from the 1.3L ---> 1L diffs? On the front.
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

midnight wrote: Ok then, is it possible to put the disc brake setup from the 1.3L ---> 1L diffs? On the front.
Yes it all bolts on, though I haven't done it myself, I assume you use the hubs and everything from the 1.3 onto the 1.0.
Mines a 1.0 litre and it has 1.3 disc rotors, so I guess they are exactly the same.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest