Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearing

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 37
Joined: Sun May 07, 2006 2:03 am
Location: bothell wa.

gearing

Post by rockzilla »

how low can you go with a feroza in stock form. currently at 5.29 but the 35 m/ts kinda take away from that :twisted:
is it normal for one testicle to be larger than the other three?
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

The diffs from automatics were a little lower (5.76 IIRC???). I think your best bet though is to SAS it and do a drivtrain swap so you can use a tranny case from something that has aftermarket rockcrawler gears available....unless you just want a maller.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

If you are using really hard, be a bit carefull of higher diff ratios as the pinion gets weak as the number of teeth drop off for the same size crown wheel. Obviously its not an issue with truck style diffs but with Feroza's ?

This is an observation - not Feroza fact so others may have better info.
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 18 guests