Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lights

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

lights

Post by micka1 »

just wondering what the best drining lights out there are and peoples opinions ? ( not Hid )
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

electrical section perhaps? :lol:
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Re: lights

Post by DamTriton »

micka1 wrote:just wondering what the best drining lights out there are and peoples opinions ? ( not Hid )
Best for what?????????????????

Old question that has been done to death elswhere.....

There is no "best", only the most appropriate for your driving requirements in your situation on your budget.

You want the "best" tyre on your "best" 4WD too???
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

lightforce xgt or any of the light force range
Posts: 199
Joined: Tue Feb 21, 2006 12:21 pm
Location: Berwick, Victoria

Post by QIKAZZ »

GRINCH wrote:lightforce xgt or any of the light force range
x2
RC Hobbies - Online Store - http://www.qikazz.com.au
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

x2
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

kinglakekustoms wrote:i would rather push my toyota than ride in your nissan ....
To pinch someone else's retort:
You'll probably have to.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

lol ill pay that .but its not stolen its mearly an admiration of sum1 elses sticker of back of 4bie . lets not hijack micka1
thread lol
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

Micka, Ive got IPF800's x 2 sets, IPF 900's x 2 sets, and a set of cibie super oscars. The Cibies are by far with out a doubt better than the IPFs for my applications, (These are all spot, not spread) however, if i were to do it again, I would go light force. Strong body, light weight, great light output, interchangeable lenses.

Jooga
" Some days you are the bug; some days you are the wind screen"
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

LIGHTFORCE XGT'S!!!!!

I bought myself a set on friday arvo and my god they are the best (non HID) light ive driven behind, wouldnt waste my time looking at anything else!!!!

my $0.02 worth
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 182
Joined: Sun Jun 26, 2005 9:30 pm
Location: Port Hedland

Post by CruiserCruising »

Yeh i would agree i got 2x lightforce 240's up front they're awsome, especially with those ligth blue covers makes the light heaps better.
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

XGT's
Blitz
Bosch compass
IPF 900's
Hella Rallye 4000's
Hella Bull Lamps
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

If you wanna do it on the cheapie, jump on to ebay, buy a set of cruddy H3 bull lights for nix. Or spend $50.00 and buy a pair of 2nd hand IPF 800's or IPF 900's for next-to-nix. Buy a H3 HID kit. (One went for $159.00 on friday or saturday). Chuck them in. Sweet.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

Big Red Toy wrote: Hella Bull Lamps
:lol: :lol: :lol: :lol: :lol:
have u seen the size of those things, wait till they get them in a HID, that will kill :cool:
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Banned
Posts: 1047
Joined: Sat Apr 08, 2006 7:15 pm
Location: Central Coast NSW

Post by crunch »

Nightstalkers are apparently good for what you pay.


I'M NOT SAYING THEIR THE FONSHIZNIT, BUT GOOD FOR WHAT YOU PAY!!!
So don't bite my head off :finger:
[color=yellow]I don't know about Phil, but if I had 15 guys following me around all day, I reckon I'd fell like a cigarette! [/color]

Pest Control (NSW) - PM for details
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

i like my ipf's, but i wish i had hella ralle 4000's

all depends on room and what style you are after.
MUD, MUD, GLORIOUS MUD!
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

GQ4.8coilcab wrote:
Big Red Toy wrote: Hella Bull Lamps
:lol: :lol: :lol: :lol: :lol:
have u seen the size of those things, wait till they get them in a HID, that will kill :cool:
Why so funny a Hella Bull is only slightly larger in diameter then a Lightforce 240 Blitz, and the one most consider a 'bull light' is smaller in diameter. The only thing is they have a bulkier body and mounting system then the Lightforce.
If God did not intend for us to eat animals, then why did he make them out of meat?
Posts: 228
Joined: Mon Oct 17, 2005 12:55 pm
Location: Taree Australia

my 2c

Post by rockrover »

i have run in the past night stalker 170s great lil light and cheap $130 a pair and i now run ralley 4000s the diff being the mounting strength the light from the lil 170s is almost the same(pencil beam) as my pencil beam ralleys altho because of there shear size u get a better spread from the ralley where in the 170s are a very direct light i wouldnt recomend a spot spread combo in either just adjust them correctly i can see a good 500-700ms up the road and bout 25ms off the road either side at bout half way up the beam for me this is perfect
Cheers
rn106r 100watt hid lightforce 30 inch light bar 1 ton tipper and more to come
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

All comes down to how much room you have on the front of I my lux I was going to put Lightforce 240's but when I sized then I reckon they are going to cut out too much air flow to radiator, so instead have gone for the IPF 800's.

I think for the amount of nightdriving I do these should be pretty good.
It's hard to soar like an eagle when you are surrounded by geese.
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

crunch wrote:Nightstalkers are apparently good for what you pay.


I'M NOT SAYING THEIR THE FONSHIZNIT, BUT GOOD FOR WHAT YOU PAY!!!
So don't bite my head off :finger:
(oops, My alopogies Micka. I didnt read the "not HID" bit)
Had a set of the big round Nightstalker babies on my old sube wagon (RIP). I actually liked them... But then someone wanted them more than me, and flogged them at Nissan Trials '99. I reckon that they were on par with ya tyical IPF900 / Hella 2000 jobbies.

Also had four "Ashdown" 150 watt sealed beam spotties. They were ok, but on a performance vs sucking amps, they kinda !sucked!. They were drawing close to nearly 50 amps. It was a bit much, especially on a little subey.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

those super cheap auto nite stakers are good what u pay for 100w 240mm light set u back $100 for the pair or fo the 160mm which were $120 but u also get wiring fuse no relay but you get a switch

then u got the lightforce range which i heard alot about im going to ge some myself pair of 240 XGT and 2 pairs of 170 XGT both 100w
and maybe the book i saw on ebay to upgrade the wiring loon to take HID globes

www.lightforce.com

www.narva.com.au

have a look there might be somthing u like

and by the way i would no for this 1.5km pencil beam stuff i doubt in 4 wheelin u would ever have to see 1.5km ahead thats if ur eyes are that good tested on the freeway from 1.5km away u seen a green sign glow but u chould never make out what it says

done a night run only a few days ago theres no need to see a tree 1.5km away when the track was pullin to a tight right

and hot tip only mount cheap lights on the bullbar
lightforce light i would mount on top of the bull bar to keep them away from the water of even on the roof rack

replaced to many spotlights not worth the time ripped them off and replacin them

cheers justin
No sig line pics please.
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

yeh the nitestalkers are quite good for the price.. i have 2 on my paj and 2 on my patrol and they work great. when the paj gets sold il be putting 4 on the patrol and see how it goes
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 306
Joined: Mon Dec 27, 2004 3:59 pm
Location: Sunny QLD

Post by MattGU »

My nighstalkers were Ok for the price but the both rattled apart on the Cape.. . Have IPF 900 now they are excellent
Posts: 20
Joined: Mon Oct 23, 2006 11:00 pm
Location: Brisbane, Queensland

Lights and Arrangements?

Post by LuckyLegs »

...edited (no removal button?), see below
Last edited by LuckyLegs on Tue Oct 24, 2006 3:37 am, edited 1 time in total.
Lucky they don't snap off!
Posts: 20
Joined: Mon Oct 23, 2006 11:00 pm
Location: Brisbane, Queensland

Lights and Arrangements?

Post by LuckyLegs »

I'm in Brisbane, and the QLD transport modifcation guide for vehicles under 4.5 tonne ( http://www.transport.qld.gov.au/qt/LTAS ... an05v2.pdf ) says "Additional PAIRS of headlights...may be fitted and must not affect the driver’s view. The headlights must be mounted symmetrically."

Regardless of the mention of "pairs" in the QLD Transport guide (which I suspect may be laxed somewhat), I am intending on mounting 3 spotlights (2 spreads and one pencil/spot) probably IPF900XS (http://www.arb.com.au/IPF_AU_900XS.php), but I'm wondering if others have used THREE (3) spotlights in this arrangement and if there is benefit to this (however minor); OR is there no additional benefit compared to running two (2) lights (e.g. one spread, one pencil)? I'm not keen on other lights except one other lights I'm considering are Cibie Oscar SC's which no one seems to talk about - why? (http://www.4x4store.com.au/Cibie-Oscar- ... 25165.html) - can the beam patterns be believed for these Cibie's? : http://cibie.valeoservice.com/html/uk/p ... 24DB1108D4

Also, does anyone know if the H9 globes used in the IPF900's are durable and likely cost of replacement in comparison to, say, comparable lamps which use H1 globes? Also why are they the only lamps (that I can see anyhow - excuse pun) that use H9's and not H1 and the like as used in other lamps?

Pete.
Lucky they don't snap off!
Posts: 98
Joined: Sat Jul 23, 2005 9:19 pm
Location: Canberra

Post by RRturboD »

I had IPFs and replaced with Cibie Super Oscar ... thought they were b---dy good with 100w lamps, then added HIDs to them (35w 6000k) and turned them into f-----g awesome. The light output is fantastic and improved the lights heaps.
try a cheaper light and add HIDs, overall not much more than a good pair of lights with 100w lamps, wiring, relays etc...
Michael T
Aussie '88 RR Tdi300 Auto
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

I've had 3 sets of lightforce 240 Blitz, 1st ones were pinched, the second set were replaced under warranty because thereflector was pitting, the third I just sold as the reflector was pitting. They are an awsome light in terms of output and weight, but I doubt their longevity and am looking at other at the moment to replace them. The distance with the l/f's is fantastic, and with the combo covers gives a great spread of light, however the old Cibie super oscars may have been better, although not as bright.
Damian.

should I swim it first ?
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

You haven't said what vehicle or its use,
but if these lights are going to see any water go sealed beams.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 20
Joined: Mon Oct 23, 2006 11:00 pm
Location: Brisbane, Queensland

Post by LuckyLegs »

Author Message
droopypete
Posted: Tue Oct 24, 2006 2:17 pm

--------------------------------------------------------------------------------

You haven't said what vehicle or its use,
but if these lights are going to see any water go sealed beams.
Peter.



Peter - my light purchase is intended for my 91 4Runner SR5 and for touring and bush camping - nothing major, but just me and the stars and the wide open spaces! I've got crappy IPF dual reflector 55W spots at the moment (they are 968SC's combined spot/driving). I'm getting a bigger bullbar for better lights (channel is too narrow on my current older bar).

I'm new to 4WDing, but suppose I'll at least be going through some water (creek crossings etc) from time to time, but no submarine stuff!:shock: The IPF 900XS's are 'sealed' for short duration submersion, so is that what you mean by "sealed beam"???...Isn't it the case if you break a lens in a sealed beam light, then you need to replace the whole light, not just the lens!? (although I suppose if you sink a unsealed light you've still gotta buy a new one, huh! :roll:) Regardless, what sealed beam lights would you recommend for touring/camping?

PS Any idea if the Cibie SC's are sealed beam?

Pete.
Lucky they don't snap off!
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

LuckyLegs wrote:

Peter - my light purchase is intended for my 91 4Runner SR5 and for touring and bush camping - nothing major, but just me and the stars and the wide open spaces! I've got crappy IPF dual reflector 55W spots at the moment (they are 968SC's combined spot/driving). I'm getting a bigger bullbar for better lights (channel is too narrow on my current older bar).

I'm new to 4WDing, but suppose I'll at least be going through some water (creek crossings etc) from time to time, but no submarine stuff!:shock: The IPF 900XS's are 'sealed' for short duration submersion, so is that what you mean by "sealed beam"???...Isn't it the case if you break a lens in a sealed beam light, then you need to replace the whole light, not just the lens!? (although I suppose if you sink a unsealed light you've still gotta buy a new one, huh! :roll:) Regardless, what sealed beam lights would you recommend for touring/camping?

PS Any idea if the Cibie SC's are sealed beam?

Pete.
Pete, the term "sealed beam" means that the filiment is integral with the lamp (meaning that the globes are not replacable) some driving lights are sealed very well but none are waterproofed as well as a sealed beam, lightforce for example, have a good sealing system using a series of O rings around the globe holder, my L/Cruiser (road car fitted with L/Force )dosn't see water like the zook does and I have not had a problem with them, but on a 4x4 that puts its bonnet under the water regularly sealed beams are foolproof.

That said if you are chasing long distance illumination you may be better with something else, my sealed beams have 250 watt lamps in them and they throw an enormous amount of bright, white, light, in a wide circular patern, they have great reach simply from the power of them, but for a long distance pencil type beam you could do better.

I like my light force lights, I like the performace of them, I like the back up they give when there is a problem, and I like the fact that they are made in Australia by Australians, I also liked my super oscars but they kept filling up with water :x
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Post Reply

Who is online

Users browsing this forum: No registered users and 131 guests