Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tappits on 2LT surf motor

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 26
Joined: Wed Feb 08, 2006 8:25 am
Location: Penrith

tappits on 2LT surf motor

Post by poo_trol »

can anyone tell me if the 2LT surf motor
has hydrolic or adjustable tappits

any info would be good on this motor
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

they are a shim adjustable valve clearance.
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

tappets

Post by LuxyBoy »

Probably uses shims like the 3L but i am not completely sure.
Kind Regards,
Brad
Top
Posts: 26
Joined: Wed Feb 08, 2006 8:25 am
Location: Penrith

Post by poo_trol »

thanks guys
have to try to adjust a mates on the weekend will let you know how we go
Top
Posts: 101
Joined: Wed Feb 23, 2005 1:27 pm
Location: Nth.Brisbane Qld.

Post by NiftyNev »

Probably shims unless it is an older model with roller rockers.

Nev
'92 Toyota Surf LN130
2.4 Turbo Diesel
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

NiftyNev wrote:Probably shims unless it is an older model with roller rockers.

Nev
i thought it was only the older 2L that had rollers not the 2LT ??
Top
Posts: 101
Joined: Wed Feb 23, 2005 1:27 pm
Location: Nth.Brisbane Qld.

Post by NiftyNev »

tweak'e wrote:
NiftyNev wrote:Probably shims unless it is an older model with roller rockers.

Nev
i thought it was only the older 2L that had rollers not the 2LT ??
As far as I know there are two versions of the 2L-T the latter usually refered to as a 2L-T11 (2). There is two rocker covers, an alloy and a pressed steel. The alloy cover should have rollers and the pressed steel buckets and shims.

Here is a thread on the Surf forum that seems to support this.

http://toyotasurf.asn.au/forum/viewtopi ... er+rockers

Nev
'92 Toyota Surf LN130
2.4 Turbo Diesel
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

You are correct nev, my mistake. Alloy rocker cover has adjustable rockers, steel has shims, sorry for the mix up.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests