What would be a good donor for some stock body<->chassis blocks that are say an inch to an inch and a half tall?
I am putting a G60 back together and the standard body mount "pads" are only about 10mm thick, I figure I can get a bit of body lift if I use blocks from something else that is built with more of a gap.
50-60mm diameter would work, 60mm-a-side square would be even more like the originals. Just wondering if a lux or something comes with such blocks standard. I don't want mega lift, but I figure I might as well put it back together a little bit taller.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stock body blocks
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Stock body blocks
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 2 guests