Any one want to part with either a 1.113:1 and/or 1.174:1 high range set for a LT95?
They were 1979 to 1981, and 1974 to 1978 respectively RR 2 doors with the LT95.
JC
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
high range gear sets anyone??
Moderator: Micka
high range gear sets anyone??
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
high range gear sets anyone ??
Justin if you could give me the tooth counts
I have 3 sets in the shed and I never marked them up
and have forgoten where the info is on tooth count and ratios.
Cheers
I have 3 sets in the shed and I never marked them up
and have forgoten where the info is on tooth count and ratios.
Cheers
out of my mind, back soon.
1103.9,
YES it pulls like a train, even in the driveway at work with no exhaust hooked up yet!! Very happy.
Swamp,
I haven't got a sample unfortunately but I'll try and get some info, thanks.
Mark2,
I don't actually want to swap mine, I want a second set (lower) for touring/towing, so I can sit on 100 in 4th. ATM with the 35's I think it'll work too hard dragging 1.5 tons, and I want to use 4th mostly. So I'll change high range gearing for trips to the mainland etc.
I might have another .996 gearset here for sale though, If you're interested i'll dig it out.
JC
YES it pulls like a train, even in the driveway at work with no exhaust hooked up yet!! Very happy.
Swamp,
I haven't got a sample unfortunately but I'll try and get some info, thanks.
Mark2,
I don't actually want to swap mine, I want a second set (lower) for touring/towing, so I can sit on 100 in 4th. ATM with the 35's I think it'll work too hard dragging 1.5 tons, and I want to use 4th mostly. So I'll change high range gearing for trips to the mainland etc.
I might have another .996 gearset here for sale though, If you're interested i'll dig it out.
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
high range gear sets anyone ??
Justin I just found the info on the tooth counts and posted it seperatley
as it would go well in tech .
I will check my sets tomorrow and mark them and cable tie them together
this time.I willpost what I have available
Cheers
Swamp
as it would go well in tech .
I will check my sets tomorrow and mark them and cable tie them together
this time.I willpost what I have available
Cheers
Swamp
out of my mind, back soon.
I would be interested, no idea what they're worth however.....justinC wrote:1103.9,
Mark2,
I don't actually want to swap mine, I want a second set (lower) for touring/towing, so I can sit on 100 in 4th. ATM with the 35's I think it'll work too hard dragging 1.5 tons, and I want to use 4th mostly. So I'll change high range gearing for trips to the mainland etc.
I might have another .996 gearset here for sale though, If you're interested i'll dig it out.
JC
Who is online
Users browsing this forum: No registered users and 5 guests