Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

replacement brake pads

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 5
Joined: Sat Aug 05, 2006 8:45 pm
Location: South Australia

replacement brake pads

Post by 95NJ »

hey guys,


It's time to repalce my brake pads and i was wondering what other people had used. i did search but i found very little info.

i have a 95 nj pajero.



cheers

chris
Top
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

i have been using 'bendix 4wd' pads for the last 50,000km and found them very good. they are probably half worn at the minute, but i will have to replace them as one of my pistons in the front caliper has siezed and worn one edge of the pad down low. they have very good bite and im happy with the wear. the original pads(OE) lasted about 70k.
price per set for my nl about $65.
hope this helps.
cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

pads

Post by klrevo »

yeh i use ferodo. i like their brake pads, and used them on most cars, and they seem to work excellently once again on my nj,

dean :D
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Bendix are good, especially for the front.

Bendix rears seem to wear out real fast on the old NJ Paj. Think the pads are just too small for the vehicle.

Have just bought some cheapies off ebay to see how they go.......kevlar and all that....could be interesting but seeing as how fast the Bendix wear, can't be that risky.

I always keep worn one just in case one goes slanted on the rear (very often). Spend 4 hours today dismantling and regreasing all the slides on the rear. Front was fine as usual.
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 27
Joined: Wed Mar 09, 2005 2:58 pm
Location: hobart

Post by TASPAJ »

My Bendix rears only lasted about 25,000km and they were down to the metal. And the fronts have done about 50,000 but i'm not sure what brand they are. I put Ferodo 4x4 pads in the back this time lets hope they last a bit longer.
Pajero NH GLS 3.0 32" BFG Muds Kingsprings 2" ARB Bull Bar.
Top
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

my bendix 4wd rear pads are still going fine after 45,000km.
cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 5
Joined: Sat Aug 05, 2006 8:45 pm
Location: South Australia

Post by 95NJ »

cheers for the replies guys. i think that i will go for the bendix.

time to shop around.


cheers

chris
Top
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

i have found that 'All clutch and brake' at st mary's are very well priced. i will be getting my new front pads from them($65 from memory) and new seals for the front pistons as one has siezed up.
cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 5
Joined: Sat Aug 05, 2006 8:45 pm
Location: South Australia

Post by 95NJ »

ok then cheers for that. bit of a drive for me i live out in the nth. anyhoo.

i shall check then out


chris
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Im using TWR pads. They turn my white rims Black after two days and than need washing again. Wont be getting them again. :bad-words:
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 8 guests