Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

custom hubs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

custom hubs

Post by NICK »

i have almost finished my IFS outers, and realised that the WMS is still about 1/2-3/4 of an inch from the end of the hub and i dicussed this with cplux before i started the hubs.

Has anyone machined new hubs that sits the wheel out futher. i am seriously thinking about doing this as it would net about extra 1 1/2 inch more width on toy axles over the IFS hubs.


pros and cons, pics?



NICK
TECH SCREW GURU
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I think the only Plus for this would be that you may get away with the mod if you had to go for a machinery.Apart from that i wouldnt bother as wheel spacers are easy.The other prob is the turning radius will increase and you may find you will scrub the tyres on the firewall a lot more.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

the only reason i was looking at it was for transport reasons, and wheel spacers would be a shit load easier.

you think even with the diff foward the tyres will rub on the fire wall?


NICK
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

heres the general idea
TECH SCREW GURU
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

..

Post by hypo »

Nick wood it b expensive and worth the hassle ?? i guess the other ting is it wood b legal
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

Nick, its a good thing. Wheel spacers aren't legal and can't be engineered, wider hubs can.
www.bbmotorsports.com.au
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

Nick they would also have greater leverage on your swivel hub bearings. mine seem to be holding up to the ifs ok, but i'd just watch em more closely if ya did this.
Great idea but.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

you can do this with rear hubs too :shock:

i think that is too far nick, at least with the IFS hubs they are a off the shelf item
hands and mums dont count!!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 8 guests