Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3in dump pipe for TD - special

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

3in dump pipe for TD - special

Post by bogged »

While searching the Denco site, I saw this (last time was CAV filter, which I was lookin for :bad-words: )

Special for AUGUST 2006

*NOW AVAILABLE* 3'' CAST DUMP PIPE TO SUIT FACTORY TURBO NISSAN

Image is MASSIVE, click link
http://www.dencodiesel.com/special.asp


FOR THE LOW PRICE OF $165.

CALL US TODAY!
Ph: 0269254348
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

my wife will be down there next week. If anyone wants anythiing from there i/she can bring it here to sydney ( fairfield) and you can pick it up from here.

AS long as its paiD for so we dont have to fork any money over ;) .


cheers
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

I'm thinking that's a pretty good price.

What do they normally retail for?
KRiS
Top
Posts: 28
Joined: Wed Jun 30, 2004 4:34 pm
Location: long way south/////////

Post by sunny jim »

That price sounds pretty good..... i was quoted $1250.00 few a full 3inch exhaust system, fitted and tuned , but if you could buy the dump pipe and the exhaust seperately you might get away with it for :D ,,, MAYBE AROUND $ 600.. :idea:
LC 100, GU ute.
Top
Posts: 23
Joined: Sat Aug 12, 2006 10:10 am

Post by djd2 »

Well worth it.I bput one on mine ages ago, makes a litlle bit of difference.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sunny jim wrote:That price sounds pretty good..... i was quoted $1250.00 few a full 3inch exhaust system, fitted and tuned , but if you could buy the dump pipe and the exhaust seperately you might get away with it for :D ,,, MAYBE AROUND $ 600.. :idea:
beaudesert exhausts will do a complete 3inc INC Dump for $900 delivered from Qld to Melb , well they would the other week when I called.
Top
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

The MTQ one measures 2 1/4", and isnt really 3", and we make our own bigger radius because of this.

We also do 3" mandrel bent, with straight muffler, using all factory hanging points for $850, with dump pipe, as part of our power upgrade.
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

http://cgi.ebay.com.au/3-CAST-DUMP-PIPE ... dZViewItem
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

what turbo is this to suit ? any chance of it fitting a SD33T factory setup. i emailed em and they said they dunno.


i'll be getting a few few fuel filters from em next week, so maybe i can add to the order.

cheers
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

pongo wrote:what turbo is this to suit ? any chance of it fitting a SD33T factory setup. i emailed em and they said they dunno.


i'll be getting a few few fuel filters from em next week, so maybe i can add to the order.

cheers
it is for the 4.2 I emailed them
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

anything to stop you using one of these on an aftermarket kit? as long as you were running a T25/28 turbo.

http://cgi.ebay.com/ebaymotors/89-98-Ni ... 0022642937
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

been lookin into this again today. 3inch front to rear and dump pipe.

first place near work Trufit on Warrigul Rd $700 inc hand made dump with 2 muff

second place (boundary and white st behind servo) "not interested"

3rd place $750 with 1 muffler we make dump, or $500 you supply dump

ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...

MTQ - $900 for exhaust and dumpor $240 for dump

Beaudesert - $870 exhaust and dump + $80 shipping + $50 handling and packing - complete system If I buy 5 or more complete systems, they will take $20 off the price of each fuckin geneous of them.

Going to try some place in Lilydale that was mentioned and more from white pages.
Top
User avatar
lolergram
Banned
Posts: 2150
Joined: Wed Jan 03, 2007 6:09 pm
Location: Melbourne, Australia

Post by lolergram »

bogged wrote: Beaudesert - $870 exhaust and dump + $80 shipping + $50 handling and packing - complete system If I buy 5 or more complete systems, they will take $20 off the price of each ***** geneous of them.
LOL
Don't expect to see my recipe, until I receive my cheque and collection fee
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

bogged wrote:
ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...
Geelong only a short ferry ride from your side of town.
THOUGHT FOR THE DAY....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:
bogged wrote:
ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...
Geelong only a short ferry ride from your side of town.
Priced ferry the other week when came back from the Ocean Road. 2 people,car and trailer ~$90 :shock: wanted to do it as a treat for Cammo, but at that price, I put up with 290382039820398203984 cars comin back from holidays
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Hey bogged give this place a call they may be able to help and i have used them a few times in the past.

TIDD BROS. EXHAUST
90 Hudson Road, Spotswood
(03) 9391 4277


They are not far from me so i could possibly pick up if needed.

Jimmy
GQII Patrol YAY!!
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Bogged. Do you still have a Schwitzer turbo on TD42? If so can you give me the number and type. I still have notion to buy all the kit except the snail and exhaust as I could maybe get those parts here in uk.

The Vat etc is crippling from Oz to UK. Schwitzer are available here as they are on Renuilt trucks. The only snag would be if the turbo had been modified from standard by Denco.

They have been helpful and I dont like to keep pestering them as they may think I`m trying to copy their stuff or something.
Cheers Alex
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

lexi wrote:Bogged. Do you still have a Schwitzer turbo on TD42? If so can you give me the number and type. I still have notion to buy all the kit except the snail and exhaust as I could maybe get those parts here in uk.

The Vat etc is crippling from Oz to UK. Schwitzer are available here as they are on Renuilt trucks. The only snag would be if the turbo had been modified from standard by Denco.

They have been helpful and I dont like to keep pestering them as they may think I`m trying to copy their stuff or something.
Cheers Alex
Na, GUJOHNNO has it now, you could message him, or failing that, email Denco...
Couldnt ship it to a mate in a neighbouring country, and then pick up from him on a weekend? :) Just thinkin out loud how to bypass VAT :bad-words: :bad-words:
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Thanks anyway mate. If you are coming to UK for a Walkabout.you can bring it on luggage :D . I will put you up for a few weeks :D

It`s not just the Vat... Import duty and a hefty charge for Post Office delivering through customs is the killer. Also the 700$ to Denco for post.
I`ll keep thinking of a way :lol:

Alex
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest